Amplifier Question


I recently made an offer to buy a Classe CA-400 for $2,000. My question is whether this much power is needed to drive a pair of Tyler Acoustic Signature Ref Monitors?
firecracker_77
Pairing an amp and speakers is the real deal, and don't forget the cables that connect the two are also important. Also, the amount of power is not the only variable to consider, although as mentioned above, too much is better than too little (like life eh?).
You have some good starting recommendations here - I suggest you look at the threads and see who's been using what with Tyler's, or give Tyler a call for their recomnmendations. Another method is to start a thread on amp speaker pairing with what you've got, and many here will try to help you out.
Snofun3 is correct about matching speakers and amplification. Power requirement and impedance load MUST be considered for optimum performance. A very expensive pair of speakers mismatched with a very expensive amplifier can be disastrous. Check with the manufacturer and/or dealer before investing in either.
I said with all due respect I felt it was a foolish statement, not once did I say you were a fool, I also never said you were a know it all, I was speaking in general. Life is too short to get mad at opinions.
Thanks everyone. My Classe should arrive this week. I am planning on getting the Linbrook Signature System very soon to get better bass. Although, I have not experienced what my Linbrook monitors can do yet as I'm still using an ancient tube amp. I will definately post a follow-up to let people know my experience. BTW, I spend more time each day fantasizing about equipment than I actually have time at home to listen. That's when you know you have a problem!
I am driving my Tyler Sig Monitors with a Classe CA-200/ CP 50 combo and it is outstanding. Once in a while I'll toss in queens of the stone age, nine inch nails, audioslave and try to loosen up the paint on my walls and never is there any sign of fatigue or loss of detail. I am also contemplating either the bass modules or trading up. I have heard comment that the full range Linbrook system loses some detail, imaging and has a bit thinner midrange, I would be interested to hear your comparison once you've burned your new Linbrooks in bit. Good Luck