'Racks'. Important? Best bang for $$?


Hello, all you rack enthusiasts out there in Audioland. it has come to my attention, in pursuing ISOLATION devices, a rack can either add or detract from the sound one's gear is capable of producing... Wow!

I recently changed mine and went with something more esthetically pleasing, not knowing or even considering how it could affect the Sonics of a system! I found out the hard way. Things got worse. A lot worse! I imagined all sorts of issues and addressed them all, save the rack. .. and only by accident did I find it to be the source of the negative swing in sound quality to my system.

Being convinced, now, a good rack is an important & integral part of the 'system', I would like to prevail upon those of you who have found good quality racks, at affordable prices....

Should they have stone shelves, absorbant, wood, isolated, etc... Coupled or uncoupled?

I think several are in my future... one for preamp & amp. One for the sources, (3, no phono though), and another for proc & multi amp.... it would seem ..or some combination that supports those items. Access, cooling, and ease of assembly unless it/they come put together, are noteworthy too.

Sure would appreciate some other experiences here, if you please. Many thanks.
blindjim
Blindjim, another factor to consider is once you've spent your coin on the tools, it'll take you a while to master using them. And then there's the finishing of the product, stains, polyurethane, etc. When we moved into our first home w. beautiful oak floors that needed refinishing, I thought I'd be "Mr. Impressive" and redo them myself. Sanding was a PAIN in the ass, but edging with the hand sander broke the deal. Almost impossible to steady, kept making waves in the surface of the wood, stripping bits off the moulding. Did about five feet of that and said, "That's it, I'm done. I'm NOT wrecking my home for my ego's sake." Paid to have it done and results were far better. A person has to learn when to leave their pride aside. If you have the skills developed then ok, but if it's all new to you and you're just mucking with it, it's gonna be a long learning session.

Cytocycle, wow, you must be dealing with some seriously heavy gear if your warping the Plaeau racks! I have components up to 60 or so pounds don't make them sweat. Narry a warp or bend. Different models may vary, but they've been rock solid for me.
Not that I have to defend Plateau; they were just a good economical purchase from my experience.
Douglas Schroeder: The single wide Plateau racks are probably no problem and if it is double wide make sure it has a support or make sure you get another metal bar to screw on the underside. Shelves had approx 125 lbs each ( 2 amplifiers per shelf...). I saw a more recent plateau rack and they were better built than the one I owned 10 years ago.. (mine had metal supports on each side screwed into the MDF shelfs and not supported across the double wide shelf.. hense the warping/sagging problem.)

+1 on wood floor refinishing is for professionals.
Thanks Douglas

It's been a while, sure. I was most handy however in a wood shop. I could see far better back then too. it's a challenge, but the plans are quite simple. The finishing past the rough sanding, I'll sub it out. For myself it's a big deal on another level as well... if you think about it some, you'll understand that part I'm sure.
Blindjim, yes, for sure. I think you'd likely make a more lovely finished product than I could, sight or not! When I built my HT I did the rough carpentry work, but had the carpeting, drop ceiling and drywall finishing (everything that meets the eye) done by the pro's. Well worth the $. When I was in my 20's and single I could live with a "hack rack" - it didn't matter what it looked like. I remember when I didn't have any money and had to outfit my first apartment, I used a microwave shelving unit I got at a garage sale for a couple bucks as my first audio rack! It was dark wood laminated and after the glass door on the storage shelves were removed it held three components. Now, I desire aesthetics to be on a par with the perceived sound quality. Guess I'm older and pickier now.
Douglas_schroeder

Good.

Micro stand as equipment stand? Absolutely. I'm still using one in my bedroom. only thing I had which could support a 150 lb tv. Roll down door covers the gear too. For me, for that app. it's fine.

It is funny when I'm selecting stuff and color comes up. I'll ask some additional questions there and get some inquiries to my prefs. I tell them so long as it goes with the rest of my stuff it will be fine. Following Q: What's the rest of your stuff's colors?

Don't know for sure but I think they are... but I can't really see them. Follow up: Why's that?

Well, I'm a little hard of seeing. Usually they'll laugh, or nervously wait until I do as I explain further. Personally, I find it quite funny almost all the time.

I've three systems in all to address... if things aren't well put, for public viewing, I know where a microwave stand is that wants to retire.

If it's just OK... yet not attractive, there's a 65 inch TV that would like very much for someone to reduce it's now burden to only those duties of video. No longer a TV and carriage too.

personally, I don't 'see' a downside to it at all. lol