Anyone Experienced With Revel Gems and Sub15/LE1


Hi All. I have a pair of Revel Ultima Gems and I am going to be purchasing a matching set of the Sub15/LE1 sub and amp combo in a few months.

I would like to know what my best option would be in hooking up the system. I believe the two ways are:

1. use either an integrated (with pre-outs) or pre/power amp for the Gems and run interconnected from the pre-outs to the LE1 inputs; or
2. use an integrate (without pre-outs) or pre/power amp for the Gems and run a speaker cable to the LE1 line-level inputs.

What would be the best in terms of a) sound quality and b) convenience. Also, which of these setups will allow me to use the LE1's filter (so that the Gem's only get higher frequencies)? Or is there another setup needed to use this filter?

Thanks in advance,
X
xenithon
Hi guys. Thanks for the responses! Are these reported problems with the LE1 specific to the crossover? In other words, would using (as suggested above) the Gems in full range along with the LE1/Sub15 combo give the desired results (by bypassing the crossover in the LE1)?

If that were the case, what I planned to do is get a very good integrated amp which has pre-outs/sub-outs. I will then connect: source to integrated amp, amp to Gems with speaker cables, pre-outs to LE1 with interconnects, LE1 to Sub15's. Oh and BTW I do means Sub15's in the plural: the person I can get it from has the complete combo (LE1 with two Sub15's) which is one of the reasons I am so drawn to complete the package that way.

Alternatively I believe I would look into another subwoofer such as a Rel or Velodyne. If I do so, would you still suggeset running the Gems full range as described above (integrate amp and pre-outs)?

Cheers,
X
No, the Revel Sub is the one! It's incredibly good. And yes: the probs seem to stem from the crossover module. In my case anyway. The only thing that I wouldn't know is how to circumvent the crossover module since it's part of the whole amp and pulling it out definitely cuts the circuit.
By the way: I tend to disagree with the thought that the GEMs alone are real fullrange setting. They do need the Sub IMHO
Good luck!
Hi there. Thanks for the reply. If I use an integrated amp with preamp outs, the Gem's will be running full range. The preamp out will then feed the LE1. Wouldn't that effectively cut the crossover/filter out of the equation? I believe the problems that you guys are experiencing have to do with the filter which cuts out low frequencies to the Gems, right? Since the audio signal is going first to the Gems and then the LE1, the only filtering being done would be that of the high frequencies sent to the Sub15's. Am I right in my thinking or is there something I am missing?

Thanks in advance,
X
Contact Adidadi (his Audiogon moniker) he can give you a good deal on Sub 30s or the B-15. The B-15 is very comparable to the Sub 30 and could save you some money.
Adi is very knowledgeable and can really help you build your system. Tell him Steve sent you!