Crossoverless Speakers - Ultimate Solution ?


I have a pair of speakers which have NO crossover, except for a rather large Mundorf capacitor on the ribbon tweeter. The speaker up until last week contained a resister, but even that was removed by the manufacturer. Now the sound on this two-way horn loaded speaker with a custom made 8" woofer it really great. The speaker has a tremendous amount of detail, with NO hint of harshness what so ever.

The efficiency is around 96 dB with a minimum impedance of around 8 ohms (average is around 10 to 12 ohms).

In light of my current findings, is it possible for a conventional loudspeaker with crossovers, regardless of cost to have as much detail and air as what I'm finding.

I must say I've yet to hear a speaker retrieve as much detail without glare or the dreaded forward or treble emphasized tweeter tricking you into thinking there is more detail.

The down side to all this is obviously the lack of a good bottom end to help balance the speaker. A matching active sub-woofer would no doubt help in this regard.

Any thoughts ?
clipsal
Not bad, it's tight but lacks sufficient bass to balance out the speaker. I've heard these speakers matched to a 300B amplifier and a matching active Sub-Woofer from the same manufacturer and thought it sounded excellent. The sound was very detailed, intimate and plenty of punch where it was needed the most.
Maybe this is a silly question, but what speakers are we talking about here?
Clipsal - It seems that you already have your answer. Buy that sub and cross it over as low as you can.
Gallo speakers either have no crossover or for the reference 3.1 only has a high pass filter at 120HZ for the larger woofer.