2. speakers
  3. 1248557304

I'm adding Jupper cables and your opinion is ??

I am in the process of purchasing new speaker cables for my Avalon Eclipse's....I will let you know they are very expensive and would complete my entire system.....the issue is, the mfg.'s price for their bi-wired pair of cables adds on a whole bunch of more money which would kick me out of the game .....the dealer recommended using the same kind of wire for jumpers....I called the mfg. and they said that it could be done but did not want to comment on the sonics of doing that....so, does adding the correct or same kind of wire jumpers degrade the overall sound or does it have no affect on the sound if done correctly ...????
garebear
dcrugby
96 posts
 
agree with jd above, the bass speakers are much less dependant on wire than the mid and treble for their sonic character.

i would just suggest to get a big gauge wire (8 or 10 gauge) so that none of the signal from the amp is constricted in its last few inches of journey. silver works good on bass signals.
lapierre
547 posts
 
Agree with Dcruby.

I use Analysis plus Big Silver jumpers to bi-wire my Helicon 300s.
dopogue
1,767 posts
 
The jumpers should work fine. So should thin (solid core) speaker wires, as opposed to the garden-hose variety I used for years. I used to believe that because bi-wired inputs were provided by my speakers (then ProAc Response 3), this is what I should use. I'm glad those days are over. Good luck, Dave
koegz
317 posts
 
i believe that the desighn reason for 4 wire set up on speakers was for biamping. in which case you need 4 complete sets of wire and 4 seperate amp channels, preferably mono amps. to me "biwiring" was something created by wire companys to sell more wire. just my thoughts
garebear OP
719 posts
 
Thank you for your responses and I agree that running seperate runs would be the ultimate best - that would come with a price tag of the cable that I'm looking at of abount $16,000.....out of the question. The Avalon Eclipse's need to be-wired, so if I am understanding everybody here - okay to use a single run and using the same wire as the jumpers would be okay without losing any sonic benefits.
More to discover