Summary: I hope to express my evolution regarding the importance of, and the benefits of cleaning lps.
History: I've been a music lover all of my life. The effect music has had on my life has been immeasurable. I know now, even more, how music (effectively and honestly presented), can have a positive impact on life.
Here we go. Over the years, I've developed a cleaning regimen. An effective one at that. But, there was always an "elephant" in the room, so to speak. That elephant being, using the vacuum cleaners out there has been a useful but ineffective tool, because, one is constantly trying to clean away crud by "brushing away", (supposedly), the contaminates set deep into the lp grooves. In reality, we are imbedding some of the crud, deeper into the grooves by this time honored process.
My current cleaning regimen: I lay an lp on a clean microfiber cloth, administer Audio Intelligent Enzymatic fluid by way of a VPI bristle brush (that I always steam clean after each lp). While this is working it's magic, I'm waiting for my steamer to reach operational value. I then clean one side, repeat for the other side. I then take that lp into another cleaning station where I administer Audio Intelligent Archivist Formula with a separate applicator, and vacuum that off on my Record Dr. Then after the two sides are done, I take it to my VPI 16.5 and use Aquafina water on a dedicated brush to spread that across the lp before it is vacuumed up. During all of these processes, I clean the velvet pads with my steamer. I have separate cleaning brushes for each individual stage. This prolongs the 'pads' life.
My middle name should be "Anal". That's cool with me. Lp's are like my children. I'd do anything for them.
I do as much record buying by way of "events" as I do by mail order. I think to properly get across the effectiveness of this product, I need to convey my experience with an lp I purchased new and that has evolved with me in all of my evolution of audio.
Shawn Colvin "Steady On". My most played lp of all time. I even purchased an additional copy after believing my original was becoming "worn out". I just played it again after putting it through an Audio Desk cleaning. The loud ticks & pops that I've listened to for decades are now at the most, negligible, at the least, non-existent. This is important, this is an lp I purchased new, been under my control all of it's life. I know this lp!
Sonics: What I've noticed immediately was, leading edge transients were more relevant, more 'a part' of the musical whole. The air, bloom, headroom, normally associated with a good set-up, seems to be integrated naturally. Not a big deal, (It really is).
Other aspects: With the vacuum cleaners out there, we always have static introduced by the cleaning process. This most likely comes from the velvet pads. I became a slave to, (after my past/present, anal cleaning process,) constantly using an antistatic gun before each side. Thankfully, this is no longer necessary. Actually, subjecting an lp to the usual carbon fiber brush before each side is a thing of the past! Additionally, having to constantly clean your stylus is not necessary. Put an lp through the Audio Desk, put that lp into a clean anti-static inner sleeve.... AHHH! Since dust doesn't stick to an Audio Desk cleaned lp, if you notice any at all, just a blow will get the job done. Am I getting through to you now!
I think you may be "getting it"! It's fully automatic. Go listen, come back later. It's clean and dry!
For me, It's the ultimate, a life saver. I can sit back an enjoy each and every side of any lp, knowing all the while, I've done my part. Now, the question is, Have you done yours?
A caveat: I will continue to steam clean every lp before it sees the Audio Desk. There is the cost of the "barrels, fluid/water" and such.
With my dedication to vinyl done right, I can't think of any other product that brings me more joy and satisfaction than the Audio Desk System vinyl cleaner. ( I have NO affiliation with the manufacturer or it's importer).
As I stated earlier, my middle name is still "Anal".
Long live analog!!
Similar products I have had a regimen I've developed through the years. The following is a list of products I currently use:
My comments should be taken from now on as this: when looking at the machine from the front, there is a right & left side. The right side has more contact within the workings of this machine. The drive rollers (unseen) that contact the lp are positioned more towards the right side, the barrels and their constant motion happen to position more torque towards the right side. This leaves the left side to wobble at the left side. A replaceable, low/no static insert machined into the top of the cabinet on the left side would remedy this wobble and have a substantial affect on the wipers performing better.
Update: I failed to mention the 'filter' is also white.
I've cleaned maybe 150 lps by now. As I stated earlier, the WHITE barrels and now the WHITE filter doesn't lie! It's very telling how, after my initial steam cleaning of lps and then putting them through the AD cleaner, how these white filters are turning black. This is the "crust" of the issue folks. This is indisputable evidence of how superior this machine is to the others I've used.
Update: I failed to mention the 'filter' is also white.
I've cleaned maybe 150 lps by now. As I stated earlier, the WHITE barrels and now the WHITE filter doesn't lie! It's very telling how, after my initial steam cleaning of lps and then putting them through the AD cleaner, how these white filters are turning black. This is the "crust" of the issue folks. This is indisputable evidence of how superior this machine is to the others I've used, and how the sound will improve by this factor.
Since my purchase, here's the downside. It's obvious that the water blown away by the fans and by mother nature's evaporation, both come together to ultimately make the owner spend money on more & more fluid. (not cheap). The initial cost of this machine is a major investment. Couple this with the ongoing cost of the fluid and you have money draining out of your pocket. It's up to the end user to determine if this is a worthwhile investment. For me, I believe it is.
I decided to initiate a mid (500 lp fluid change as recommended by the manufacturer), regarding their cleaning/maintenance suggestions on my AD. I used a fine paint filter and drained my current fluid into a clean container. I then used new distilled water to pour into the AD in order to wash out contaminates in the unit. I also rinsed out the filter. I then reinstalled the filtered fluid back into the AD and added (new) to top it off.
I trapped some large vinyl pieces this way. I also washed off a lot of noticeable vinyl pieces from the filter.
I feel this is a way to prolong the buying of the expensive AD fluid. I do realize that at some point, dirty water is "dirty water".
Heindmuse: I tried your suggestion, I had no luck. At first I thought it helped, oh so slightly, but realized it didn't. I subsequently tried turning over the wipers in the exact same place, in the opposite channel and so on. I came to the conclusion that once the wipers get "use" to a direction, that is the direction they prefer. Kind of a memory effect.
You must have a verified phone number and physical address in order to post in the Audiogon Forums. Please return to Audiogon.com and complete this step. If you have any questions please contact Support.
