Review: Dunlavy Audio Labs SC-IVa


Category: Speakers

When I decided seven years ago to upgrade my audio system, I started by finding a speaker I loved. I searched for almost a year listening to every speaker available in the Minneapolis area. I found Magnepan and MartinLogan to be stunning but too dry and fatiguing for my taste. The midrange was not as deep and rich as I was looking for. Wilson had great sound but beyond the budget I was hoping to stay in. B&W sounded thick and boomy to me and Meridian was electronic and artificial. Thiel, Audio Physics and Dunlavy became the finalists. Being a late ‘60s early ‘70s guy, I came from Marantz and MaIntosh electronics and JBL and Altec Lansing speakers. The size and depth of the sound of Dunlavy along with the exceptional midrange were the final factors in my choosing Dunlavy IV as the speaker I wanted. The problem was I could only afford the Dunlavy III, exceptional midrange but not the ultimate bottom end of the IV.
It was about two years after buying the III's that I had the opportunity to upgrade to the IV's. It turned out that over those two years Dunlavy had improved the IV's and had a new model, IVa. They amazed me to find the IVa was even richer and deeper than the old IV model. The Dunlavy IVa speaker consists of two 10" woofers, two 5" mids and one 1" composite textile dome tweeter. Frequency response is 25Hz to 20 kHz, and Sensitivity is 91 dB with an Impedance of 5 ohms. Size is 72" high, 15" deep and 12" wide with a weigh of 190 lbs. each. $8495/pr
I believe Dunlavy speakers have no rivals within their price category. John Dunlavy is obsessed with designing the most accurate reproductions of sound. To meet this stringent standard Dunlavy has built one of the worlds best-equipped laboratories in order to test his designs. This has lead to some very harsh discussions between John Atkinson of Stereophile and John Dunlavy. It seems that JA does not like being out engineered by one of the great loudspeaker designers and the result was punishing JD by putting the once Stereophile "product of the year" Class A component into their B class after Dunlavy improved the speaker to JA's recommendation. Despite the politics of Stereophile Magazine, this speaker will hold its own with speakers two and three times its cost.
The highs are clear, grain less and extremely extended. JA spoke of them appearing a bit forward but I have never felt that was the case with this speaker, and can hardly believe a comment like that when compared with some of Stereophiles favorites MartinLogan and Meridian. Comments like these only strengthen my lack of trust for this Magazine. The midrange on all Dunlavy speakers is amazingly magical. I have not tried any other speaker that is as pure and life like with the female voice than Dunlavy. They display all the color and texture of the midrange with a crispness and transparency. Bass has long been the contention point of the IV series. The fact that they rate them at 25Hz meaning that it cuts off one organ pedal is hardly an issue for me. On the double bass, even the lowest note is crisply defined with no bloating or smear. The famous subway as heard on Water Lilly Acoustics "Natures Realm" with the Philadelphia Orchestra is deep under my floor forward and to the right. On Cowboy Junkies "Trinity Sessions" the foot pounding on the stage is as if he were in my livingroom pounding on my floor. I have no lack for bass from my speakers, in fact any more might be too much. Sound stage is wide and very deep. Excellent transient speeds, superb impact yet with an effortless smoothness. I truly believe these are the best speakers I can afford and is very much at home in my system. They have never left me lacking or longing for something better. That says a lot for a guy who is always looking for more, but never from my speakers. These are simply great speakers, and their service is exceptional as I found out with my III's, I twice had drivers replaced although it turned out the speakers had nothing to do with the problems I was having.


Associated gear
Sony SCD-1 SACD player
Placette active pre-amp
Plinius SA-102 amps
Nordost Valhalla speaker cable
Nordost Valhalla and NBS Statement interconnects
NBS Statement power cords
Hydra power conditioner

Similar products
Thiel CS7 series
Audio Physic Virgo
Wilson Watt/puppy
128x128jadem6
Post removed 
I have the Cantata's the smaller brother to the 4A. I had them modified with high end caps by Blackie Pagano at tubesville.com What I got was a 100% improvement. He said the parts used were really cheap-he did not change any circuits just parts. I got the same sonic signature but the improvement was off the charts. I wonder what the IVa would sound like with some good parts?
Khaki8, thank-you for bringing this topic to my review. There has been alot written about the quality of parts used in the Dunlavy cross overs. I would love to see a summary of trials people have done that could attach to this review. I also wonder if anyone has talked to John Dunlavy about the issue of parts quality and the idea of upgrading to higher quality.
Actually I think I may try to call John to get his feedback.
I just got off the phone with John Dunlavy. Of course being the designer of the Dunlavy speakers he strongly defends his selection of parts used in the crossover. This should not come as any surprise, but let me tell you how he defended his selections.
He did acknowledge that he could have used more expensive parts, but he said he selected his parts on their performance and not on cost. The capacitors he uses are polypropylene and have the best measured values of any capacitor on the market, there are simply not more accurate capacitors available. The Inductors he uses are not an iron core because they simply do not perform as well, they tend to saturate at very low levels, thus they are less constant in their values. The air core inductors used again are the most accurate and constant he has measured. His goal is not the "most expensive parts, it is using the parts that produces the best fidelity."
As I stated earlier, his goal has always been to create the most accurate speaker possible. He not only uses his ears to test the speaker's performance but judiciously measures every speaker to within +/- 1 dB with a full set of measurements made in his world renowned anechoic chamber. "Every speaker" built is thoroughly measured for all aspects of performance and only then are released to the client. "No other speaker in the world is put through such stringent testing" all in the name of accuracy.
John reminded me that the IVa is used in all the major recording studios around the world. This is the speaker that most music today is sounded to, so altering its accuracy with other components will add distortion or otherwise lessen the realism of this speaker. John had commented that he sometimes thinks "people would rather hear distortion or otherwise inaccurate sound rather than the truth."
Again I think that remembering the goal of Dunlavy speakers is important, to produce "accurate speakers." I was reminded of a story John has told me before where he sets up a pair of IVa speakers in his large anechoic chamber along with real instruments. The piano is the story he tells where they play a grand piano or a digital recording at 24 bit was played through the speakers. The people they bring in were to detect which is playing cannot identify any difference between the two.
If you do choose to modify your speakers you are choosing to modify the accuracy of these speakers, which may be to your personal taste but it is not the goal of Dunlavy speakers. Dunlavy wants to "reproduce music as exact as possible." If the measurements and the listening tests are to be believed then the IVa has succeeded, and any alteration will only lessen those measurements.
It is an interesting topic, I guess those who do choose to alter their speakers are trying to solve another problem in their system. I would recommend people look at what other weaknesses might exist in their stereo before looking at the speakers as the issue.
As a side note I spent sometime discussing JA and Stereophile. This is a whole other post some day!