Recommendations please for good, affordable pre-amp for system?

Mesch, would I understand you to be saying that perhaps (budget reasons) start with something temporary, but be prepared to a significantly higher outlay in the future? I would guess this is what I hear. If I went that jump now, any recommendations?

Jmcgrogan, I’m a little uncertain also with what you’re saying. If you’d said <$500 paired with more expensive amp being strange, that would make sense. Can you clarify, please? And the comment about this perhaps being more difficult of a search than speakers, really sticks. Perhaps again, something reasonable now, and then use a future time to audition various components. And, by that time, I’ll likely develop a better ear as well, to be able to decide what I like and now.

Yogiboy, I had seen that on Parasound’s website, but I’m not sure how that compares to the 2100 that I had seen. Lesser, greater quality? I did seem to remember only the 2100 had HT passthrough, which is of some importance to me.

Pani, I did a google for this, and came up with Passdiy.com -- wow. Mind blower. I can’t figure all of this out, but am I understanding that Nelson Pass has built in a set of pages to help you to build your own?! Now that would be intriguing! Like the old Heathkits. I’d be totally in on doing this, and have a blast to do it. Heathkit came and went before I ever had the ability to try any of their projects, but always wanted to do it. I’m sure you were suggesting a unit made by Pass already, although I need to continue to search to find it. It would almost be very cool to have a cabinet full of equipment, with this one device being a circuit board, all bare wired and home soldered, that’s controlling the whole thing. Yeah, I built that. (I recently made a home coffee bean roaster from an old bread machine, by analyzing and selectively employing the circuit board. <grin>)

Personally I have never liked passive line stages,  so with that said I would recommend an active preamp......especially if you want to set up a home theater....for just a little more than your budget you can pick up a McCormack RLD1 which has a HT bypass and is one of the better used values out there.  There is a Parasound  Halo P3 on the bay for $600,  another good value.   You have a great amp and speakers, don't use a receiver's preouts ,  get a dedicated preamp.     

Thanks Oddiofyi, great counsel. I have seen that unit on the web, and have it in my consideration/watch list. :)  I will gratefully check out the McCormack, another name I've heard several times now, but haven't looked into. Thanks!

donzi, you are correct. I had the > turned the wrong way, should have been <$500.

There is virtually no active preamp on the site right now that would do justice for the amplifier and the speakers that you have.
There is a nice passive unit, a Sonic Euphoria PLC passive line stage for sale on Audio Asylum for $625, maybe $500 gets it. As far as fitting in with the quality of your amp and speakers, that’s probably about the best you can do.

I would still consider selling the Bryston and going the integrated amp route, or using a source with a built in volume control.

You'll regret selling that Bryston in favor of an integrated....  I have a DAC that can drive an amp and although it still sounds good, it can't drive my amp like my preamp can.  Be patient, maybe listen to a table radio a little longer and save a little more..... That amp and speakers were $$$ when new, they are worthy of a nice pre.