2. speakers
  3. 123061-9815

Biwiring an Amp into a Single-wired Speaker?

I am well aware of the sonic benefits of biwring speakers from an amp that has two sets of outputs per channel. 

Now, my situation is that I have a biwirable amp (Krell KSA 150), a set of biwires (Linn k400), and Vandersteen 1c's, whivh only have single inputs. Is there ANY advantage to plugging these cables into both sets of outputs on the amp, and then combining the positive and negative wires (respectively, of course) into the single speaker inputs?

The reason I ask is because I am curious, and my biwire cables are a lot nicer than my single wires (Cable Talk Talk 3).

Cheers.
ubersujith
mofimadness's avatar
mofimadness
4,152 posts
 
What Al said :-)
ubersujith OP
4 posts
 
Wow, Al, thanks for this informative and well-written response.

One follow up question: I have 4 fancy WBT connectors at the speaker end of my biwire cable. Would you recommend moving them to the amp end, or use 4 lesser connectors at the amp end, and then us two of WBTs for the combined speaker connections?
almarg's avatar
Ag insider logo xs@2x
almarg
8,673 posts
 
Thanks, Ubersujith!

Regarding your follow-up question, I doubt that the answer has much predictability.  And I wouldn't be surprised, for that matter, if it doesn't make much difference.  But FWIW I suppose that at least initially I'd do whatever is simplest to implement.  Which if I understand correctly may be connecting the four WBT connectors to the amp, and connecting the two + connectors at the other end to the + connector of the speaker, and the two - connectors at the other end to the - connector of the speaker.

Good luck.  Regards,
-- Al
 
ubersujith OP
4 posts
 
Hey Al, I just set you up for another edifying reply over in the amps pre-amps forum. Cheers.
More to discover