Rel subs with Magnepan 3.6's


What Rel subs (I plan on buying 2) on a budget work well for 2 channel using Magnepan 3.6's? My room is roughly 14x35 with my system on the long wall. The ONLY other sub I am considering is SVS SB2000. However strongly leaning towards Rel as they hook up to the amps, so better synergy. Thanks for any input!
128x128Ag insider logo xs@2xsonicsoul
The svs is for movies.   Sealed sub for magnepans only.  Nothing ported  or with a radiator is gonna keep up. Really in magnepans if you want better bass it's better to jump up to the bigger panel  in this case the 20 series.    What amp / preamp are you using.   The Maggie's will show the weakest link 
I'm mostly with you timber. There is one very special sub that is THE sub for use with planars, but at about $2000 a pair, and a DIY kit at that, I didn't think sonicsoul would be interested. It is the OB/Dipole Sub offered by GR Research in conjunction with Rythmik Audio. Two 12" woofers in an OB/Dipole H-Frame (not a sealed box, not a ported one either, but two woofers optimized for free air use), powered in a closed-loop feedback circuit by a Rythmik plate amp incorporating a shelving circuit to compensate for the acoustic cancellation endemic to OB/Dipole designs. The only Open Baffle Dipole subwoofer with Servo-Feedback controlled woofers in the world, and unusually suited for augmenting planar speakers, whether magnetic-planar, ESL, or ribbon. The sub blends seamlessly with even the most transparent, high resolution speakers available (I use them with Quad 57's, Magneplanar Tympani's, and Eminent Technology LFT-8b's), becoming undetectable as a separate entity. Details available on the websites of the two companies. Co-designed by Danny Richie and Brian Ding, and brilliant!
Thanks for the recommendations. Rythmik is actually one other I have heard is a good match. I use Quicksilver V4's with a high output pre and really enjoy it. I was leaning to Rel only because it played from the amps signal and not from an output from the pre. I will look into it, but you have helped point me in the right direction, or avoid buying a HT sub or one that does not match well...thanks!
The Rythmik plate amp has "High Level Inputs", allowing you to take the signal for any of the Rythmik subs (sealed, ported, and the OB/Dipole model) from the output terminals on your Quicksilver (and most other) power amps, just as the Rels do. That is the PEQ3 version of the Rythmik amp, which also provides single-ended RCA connections; also available are two different XLR versions, for anyone desiring balanced connection to a pre-amp. Available in 370, 600, and dual channel 400/400 watt versions. That doesn’t sound like a whole lot of power, but the Rythmik drivers are unusually sensitive and efficient, a result of their very low mass and Servo-Feedback design and control.
Good to know, so which Rythmik sub or subs (2 would be best?) with Maggie 3.6's in a room roughly 14x35 with 8 ft ceilings? Just curious what you would recommend. Thanks so much for pointing me in this direction!