2. home-theater
  3. 1087266034

What's the chances of this Let me explain :

Here’s the thing,
Just purchased an Arcam DV 27-A to go with my Krell Showcase Processor and Showcase 7 Channel Amp.
When I’m in the set up channel of the Arcam DVD player and press the cursor key it switches the Krell processor to a different input and I loose the screen on the monitor, Only way to get back the picture is to switch between another input then back to DVD on the processor.

Called Arcam to day “Very nice and polite” was advised that there remote frequency is the same as the Krell frequency and were a wear of the problem and apologized and said there wasn’t anything they could.

Called Krell was advised that they didn’t know about the problem with Arcam components BUT have heard of other brand of components doing the same.
Then the service guy just stars going on about I should have bought a Krell standard DVD player instead of the Arcam.

“Yeah what ever”

Well now I’m looking at getting a Philips ProntoPro TSU6000 remote and using the RF adapter with it.

Will this fix my problem and is there anybody that is controlling Krell and Arcam components with this or any other RF remote?

Thanks for the advice and ideas

Carl
spazzbecker
rives
953 posts
 
The RF will have no effect on your problem. The RF is simply a relay to it's base. You will still have the same issue unfortunately.
prpixel
826 posts
 
The pronto with RF will not solve your problem because it's still going to send the arcam commands to the IR flasher on the Krell. The only remotes that I know of that lets you address each IR flasher independently are the crestron and the Anpex panels. It would be cheaper to return the arcam and buy the krell.

Good luck,
spazzbecker OP
2 posts
 
Thanks for the quick replies.
I don’t won’t to sell the Arcam or the Krell It’s just crazy that you can’t just get a remote to control both units individually.
I have been reading a lot of remote forums and web sites “Bloody hell didn’t know there was so much to learn about remotes”, Is there any body out there that could program a Philips ProntoPro TSU6000 to work my Krell components and my Arcam DVD player, would pay if needed..

Thanks Again

Carl
More to discover