2. amps-preamps
  3. 125055-3462

Need Help: What In My Home Electric System Killed the Sound?

Could really use some troubleshooting from you electric experts out there, of which I certainly am not one.  House is in rural western Maine.  My electrician (licensed and very experienced, but not in audiophile context) is running a dedicated line to the 2-channel rig.  He installed the new line up to the outlet, but didn't complete yet (we're waiting for delivery on the outlet), so the new line is temporarily capped off at the wall.  In the meantime, elsewhere in the house, he changed a broken recessed light socket and changed the related wiring to that light.  Those are the only two changes to the electric I am aware of.   The 2-channel system remains plugged into the same outlet we've been using for years (until the dedicated line is in).  This weekend, the life is gone fro the system.  For example, volume at "25" on the pre-amp would normally be quite loud, but now it needs to be turned up to 40 to get the same loudness.  Regardless, dynamics are gone, tempo is a tiny bit slow and has lost toe tapping, and vocals moved from near field to way back in the mix.   Nothing was changed in the system (Rega Saturn CDP; McIntosh C52; McIntosh 452; and Polk SDA 1.2 TL (heavily modded)).   Any thoughts on what might have cause these symptoms?  Electrician can't pinpoint anything.  Any input appreciated.  
Ag insider logo xs@2xwhitecap
Post removed 
kennythekey
558 posts
 
Does your Rega Saturn have a level control that may have gotten bumped down?
Kenny
chlv0ter's avatar
chlv0ter
31 posts
 
Something clearly changed, it's sometimes a painful process of elimination to isolate the issue.  Good feedback above.  Did anything else in the house change other than the minor electrical work?  What else is on that circuit you use for audio?  I've seen a loose ground or neutral in the elect panel cause issues.  Hope you find the culprit...

auxinput
1,538 posts
 

"For example, volume at "25" on the pre-amp would normally be quite loud, but now it needs to be turned up to 40 to get the same loudness".  Also, the description of the vocal midrange disappearing into a recess.

This is exactly what I have experienced with equipment where the internal power supply is vastly under-powered (i.e. not enough capacitance after the power supply regulators).  What happens here is that it starves the audio circuit and you feel like you have to keep turning up the volume to hear stuff (but you never quite get to the point where it is satisfyingly loud enough).

Obviously, something happened to your electrical circuit when the guy fixed the light.  Electricians do have a tendancy to want to chain outlet after outlet.  It could be that he tapped into your audio circuit somehow and it is now being chained after several outlets/light fixtures.  The idea of a dimmer knob on a light fixture is an excellent idea.  Dimmer switches do not turn down the actual use of electricity.  They just shunt it through a variable resistor so that it limits the amount of electricity/voltage going to the actual light bulb.  This could be playing havoc with the voltage supplying your audio equipment.  I would take a voltmeter and measure the voltage of your audio power outlet to make sure you're getting at least 115V.  More does not hurt and 125/130V is fine for audio equipment (though some preamps can sound harsher with higher voltage if the internal power supply is not filtered as well).  A higher voltage can have small benefit as the audio power supply as it allows a higher level of voltage capacitance in the main power supply before the voltage regulators step down to what's required in the audio circuit.

I believe your audio equipment is being starved by either voltage or current. 

auxinput
1,538 posts
 
Oh, if you're chaining 5-6 outlets/lights in a row and your audio is last in line, the resistance and connections between each outlet could cause enough of a limit to sage the voltage/current. Even though you may measure good voltage at your audio outlet, it can still starve when the audio equipment attempts to pull more current from the line.
More to discover