Line Magnetic 219ia vs Mc225


I am currently changing things up my system. I am looking to purchase a tube amp and have narrowed down quite a bit. I am unsure however, whether it would be more wise to go with a SET design or a push-pull design. The two amps in particular that I have in mind are either a Line Magnetic 210ia or 219ia SET 845/300B amplifier, or a vintage mc225 push pull amp with 7591 tubes of course. I waved the idea of a primaluna around but am pretty set on the two amps I’ve mentioned.. More will be familiar with the mc225 than will be with the line magnetic, but they get stupendous reviews and feedback, placing them as some of the best out there, next to shindo etc., in the tube amp world. The 225 obviously has its cult following as well, and is renowned and said by many to be maybe the best Mac amp of all time. (doesn’t matter)... anyway..

I am predominantly a record listener, but also listen to some digital and CD. My source pieces consist of a VPI Classic 2 turntable with a Soundsmith Zephyr 2 cartridge, an OPPO 105, and a Marantz 7701 preamp/ phono stage.

I have sold my previous speakers, and will be picking up a pair of 60’s vertical cornwalls this week. 102db obviously means that i do not have to consider wattage as a factor at all. I listen at low to moderate levels generally. Even 2 watts will have the cornwalls blaring. At this point the consideration is quality of wattage and current. The current will be responsible on the power to drive the 15" bass drivers in the cornwalls way more so than the wattage. The line magnetic SET amps will have no issues driving my speakers as they have large quality made transformers and move tons of current.

Here is the thing. I listen to jazz, classical cello and bass arco works, etc etc. I like soft rock as well. I also listen to very aggressive forms of rock. Hardcore, metal, thrash/speed metal, power violence, sludge, crust punk, etc etc. Those familiar, know what i mean. I am unsure on whether to go with a SET amp or PUSH PULL. Will one suit me better, or does it not necessarily matter, and either should do just fine? I know that the mc225 is known for being tubey, however natural, tight low end etc. The 219ia is known for being extremely transparent, refined, with a bold tight low end, beautiful 300B midrange, etc. Read Steve Huff’s review of this amp if you are unfamiliar. He calls it just about the best amp he has ever heard..... However will it does for the heavier stuff i listen to? This music is listened to on LP form more than less, and is recorded well and many are analog recordings.

Any input by those familiar with these two amps OR with push pull/SET amp comparisons in their own setups, please chime it with advice. I do appreciate it!

jkull
Regards to trim pots and worries of signal noise. The line magnetics are right up there with the shindo’s in performance believe it or not. Charles1, thank you for your reply. This is the sort of supportive advice i was looking to extract. I am leaning towards the 219ia.

Steve Huff actually made the comment than he felt this 24 watt/channel SET amp drove his 86db sonus fabers better than the 300watt SS monos that he owned.. Obviously due to the high quality transformers and current flow through this amp. He felt this was the only set amp he had ever tried that he felt could almost drive virtually any speaker. We know there are limits to this statement, but it gets its point across.
Even though I have long been and continue to be a fan of vintage tube equipment, in my mind the decisive factor choosing between the MC225 and the LM amps that have been mentioned would be the condition-related risks associated with the approximately 50 year old MC225.  And even if you were to find an example appearing to be in excellent condition and/or well restored, the possibility that you may frequently find yourself wondering if it is truly performing as well as it once did.

Also, as I recall the MC225's reputation for providing outstanding sonic performance in relatively modern systems was largely established and solidified during the 1980s and 1990s, when roughly speaking it was just half of its present age.

Finally, as always I would attach great credibility to the comments by Charles1dad.

Good luck.  Regards,
-- Al
(Former owner of a stereo pair of Marantz 2, Marantz 9, and Mac MC30 monoblocks; also a 7591-based Scott 299C, Pilot SA232, and many other well regarded vintage pieces).  
Thank you almarg. It is a factor I've kept in mind as well. Not that it is all to difficult to get the mc225 running well if it is not in top shape, but you do wonder if it is performing as it once did yes.  On the other hand, I've got a 77' Marshall JMP with 6550's and a 70' Ampeg V4 with original magnavox 7027's still in it.  Yes, i believe 47 year old tubes! They please me in so many ways... :)  


Jkull,
One other factor to consider is the 300b driver tube is audibly important in this circuit.   Those familiar with the 219ai  say this driver along with the 845 output tube are sensitive to the quality of tubes. If you decide to go for this amplifier people report that the Psvane W.E.Replica 300b and 845 are exceptionally good. 
Charles 
Charles, i have read just that yup.  The Psvane's aren't terribly pricey from what I've seen, so thats nice. I have read that the tubes it comes with are 'alright', but that things sure do open up with this circuit with a swap of some higher quality tubes. If I shoot for the 219, i will run it with the stock tubes for a few months, and then swap others in, this way I am adapted to the current sound, and can really appreciate the improvements that the other tubes may yield.