Line Magnetic 219ia vs Mc225


I am currently changing things up my system. I am looking to purchase a tube amp and have narrowed down quite a bit. I am unsure however, whether it would be more wise to go with a SET design or a push-pull design. The two amps in particular that I have in mind are either a Line Magnetic 210ia or 219ia SET 845/300B amplifier, or a vintage mc225 push pull amp with 7591 tubes of course. I waved the idea of a primaluna around but am pretty set on the two amps I’ve mentioned.. More will be familiar with the mc225 than will be with the line magnetic, but they get stupendous reviews and feedback, placing them as some of the best out there, next to shindo etc., in the tube amp world. The 225 obviously has its cult following as well, and is renowned and said by many to be maybe the best Mac amp of all time. (doesn’t matter)... anyway..

I am predominantly a record listener, but also listen to some digital and CD. My source pieces consist of a VPI Classic 2 turntable with a Soundsmith Zephyr 2 cartridge, an OPPO 105, and a Marantz 7701 preamp/ phono stage.

I have sold my previous speakers, and will be picking up a pair of 60’s vertical cornwalls this week. 102db obviously means that i do not have to consider wattage as a factor at all. I listen at low to moderate levels generally. Even 2 watts will have the cornwalls blaring. At this point the consideration is quality of wattage and current. The current will be responsible on the power to drive the 15" bass drivers in the cornwalls way more so than the wattage. The line magnetic SET amps will have no issues driving my speakers as they have large quality made transformers and move tons of current.

Here is the thing. I listen to jazz, classical cello and bass arco works, etc etc. I like soft rock as well. I also listen to very aggressive forms of rock. Hardcore, metal, thrash/speed metal, power violence, sludge, crust punk, etc etc. Those familiar, know what i mean. I am unsure on whether to go with a SET amp or PUSH PULL. Will one suit me better, or does it not necessarily matter, and either should do just fine? I know that the mc225 is known for being tubey, however natural, tight low end etc. The 219ia is known for being extremely transparent, refined, with a bold tight low end, beautiful 300B midrange, etc. Read Steve Huff’s review of this amp if you are unfamiliar. He calls it just about the best amp he has ever heard..... However will it does for the heavier stuff i listen to? This music is listened to on LP form more than less, and is recorded well and many are analog recordings.

Any input by those familiar with these two amps OR with push pull/SET amp comparisons in their own setups, please chime it with advice. I do appreciate it!

jkull
Jkull, 
Have you had the opportunity to hear the vintage Western Electric 310a tubes in your 219ia yet?
Charles 
Charles-

I have had them in my amp since they arrived. I cannot say that I depicted a clear audible change. They've only a couple hours on them thus far and are NOS. I will continue to burn them in.  They will remain in the amp as I can only assume that they are of higher caliber than the stock ones. I kept the long plate RCA's and smooth plate telefunkens and sent back the mullards.
Jkull,
Well that would suggest to me that the stock 310a tubes may be pretty good quality tubes and/or the input stage tube "may not" be as impactful or critical as the preamp section 12AX7 in the 219ia. "You just don’t know until you listen to the various tubes in specific amplifier circuit sites. Your approach is the way to proceed.
Charles
Charles- 

there was another thread i found. A member who owned a 219ia who stated that the stock 310A's were very good in his opinion. For the $ I got them for I'll leave them in the amp knowing WE tubes are very well constructed and should have a long and reliable life.  
Good decision, you’ll be covered regarding the 310a for many years. It’ll be interesting when you get around to the 300b driver and the 845 output tubes. I have good experience with both especially the 300b. I’ve heard 11 different brands in my SET amplifier (both my own and via "generous " loans from fellow audiogoners). Good 300bs aren’t cheap but the better ones definitely sound terrific.

Granted I’ve only heard the 300b as the output tube and not functioning as a driver tube as in your amplifier. When it comes to the 845 the Psvane W.E Replica was superb in my friend’s Absolare Passion Signature PSET. We both felt that they surpassed his NOSE RCA 845, subjective of course.

As I’ve said before, you Line Magnetic 219ia deserves the best tubes you can comfortably afford. I’m listening to Miles Davis as I type and I feel as though I can reach out and touch the musicians, so real is the sound. A high quality 300b tube in a good amplifier is just natural and beautiful.  I believe you can relate to what I mean. The same is true for the 845 tube. 
Charles