Please assure me I'm not going to burn my house down.


I recently bought some new mono class D amps to replace a stereo class D. I had a pair of identical diy power cords connected to the stereo amp and my preamp.

Well, with monos I was obviously going to use the identical power cords. So I needed a new PC for my pre, as the older diy version I had laying around just used thhn wire from Lowe’s and didn’t sound great. So, after some thought and research, I decided to make a PC out of cat 5 plenum cable. I kept it in its blue sleeve (containing 4 twisted pairs) and then I braided 3 lengths together for each conductor. I then took those three braids and braided them. What I have sounds incredible and I’m fairly confident that it is safe electrically.

Please reassure me. Or tell me I forgot about x, and that I should cease and desist. Or laugh at how cheap I am...

But really, I’m not going to start a fire here, am I? 8 conductors per length x 3 lengths for each conductor equals 24 strands of 24awg. Which equals 10awg for each conductor...
128x128toddverrone
I promise, if you do the research you can confirm, cat 5 that is UL listed is rated to 300v
@williewonka I was using them with a dared mc 7p pre and a class D crown xls1500. Now they're powering 2 Ghent audio 500w class D monoblocks. I find with class D that the heavier gauge conductor makes a big difference in sonic performance, especially bass control. The helix cables I made have 10 gauge main conductors..
@jea48 check this: http://www.southwire.com/ProductCatalog/XTEInterfaceServlet?contentKey=prodcatsheet393

That is the wire I used. The outer jacket is high temp smokeless PVC and the individual wire insulator is FEP or what is commonly referred to as Teflon. I promise I did my homework
You should use it. You're confident you've done your homework and feel that no one has raised any good arguments that it's unsafe. So why keep beating this horse?