2. misc-audio
  3. 128735-83996

Harmonic Resolution Systems (HRS) Platforms

Folks,

I am having trouble justifying another $7,000 for the lowest priced HRS frame, to accommodate my expensive M3x Harmonic Resolution Systems platforms.......around $2,500 each. 

While I understand that the frame and the platforms work as a "system," I currently place the M3x platforms and nimbus couplers, on a low-cost salamander rack......with decent results.

Has anyone had good results using HRS platforms on a high quality solid wood rack......walnut for example?

This would save me about $4,000 if it works.

Thanks in advance for the advice.

Labpro

 

 

128x128labpro
randy-11
1,913 posts
 
mdf will absorb some vibrations

best thing is to put the turntable (and pre-pre amp) in another room behind your preamp & amp

the maple thing is not supported with any sort of scientific studies...
labpro's avatar
labpro OP
29 posts
 

Hi goheelz,

I play a lot of vinyl. I use a Well Tempered turntable.

My system is mostly tubed (except for the transport).

Randy-11, thanks for the comment about separating components. Also I will do some additional research on maple and other hard woods.

Labpro

lalitk's avatar
lalitk
1,105 posts
 
labpro, 

Please look into Core Audio Designs, you may not even need to keep the HRS platform. 

http://coreaudiodesigns.com/products/component-racks/


labpro's avatar
labpro OP
29 posts
 

Hi Lalitk,

As we know, there are 2 main approaches to audio racks......those that resonate and become part of the sound (box furniture) and those that isolate (SRA and HRS).

I did some research on Core, and my impression was that because it does not use "solid" hardwood, it would "resonate" versus isolate.

That's not to say that Core is not a terrific product.

I could be mistaken.

Thoughts?

Labpro

randy-11
1,913 posts
 
the real issue is whether it will sit on a slab or a beam floor...
More to discover