Front projector aspect ratio question


I recently purchased a 16:9 screen for my dlp projector.

When I play "fullscreen" dvd's, the image fills the screen properly. When I play "widescreen" dvd's, I get the black bars top and bottom and I cannot make the image fill the screen.

Is there a way to get a full image on my screen (without the black bars top and bottom) for widescreen dvd's? It seems that with the DVI input I cannot anamorphically alter the image proportions/ aspect ratio.

What am I doing wrong here? Thanks.

Projector: Sharp ZX-V12000
Screen: Stewart Firehawk Luxus Deluxe 16:9 fixed-screen
Input: HDMI output from Denon 3910 to DVI input on Sharp (via HDMI to DVI cable)
west99
You are doing nothing wrong. Most movies are shot in a widescreen format that will not fill a 16:9 screen without distorting the image..

You have 3 choices; buy the fullscreen format DVD which chops off the sides so you lose information, get a player that will stretch it in the vertical axis and distort the picture, or play the wide screen version and ignore the blank space at the top and bottom.

The latter choice is the best with a big screen as it presents the film as intended by the director.
West, check to make sure the aspect ratio is set up properly in your DVD player (widescreen as opposed to 4:3 or pan and scan). If the player and your projector are set up properly, you are doing nothing wrong. On a movie such as Fifth Element, fullscreen is heavily cropped and allows the image to fill a 4:3 screen. Since the widescreen side is shot in a 2:35 to 1 aspect ratio, you will always have bars on the top and bottom of the screen. Widescreen movies are shot in three different aspect ratios: 1:79 to 1, 1:85 to 1, and 2:35 to 1. While 1:79 and 1:85 will always fill a 16:9 screen, the 2:35 ratio will always leave bars on the top and the bottom. Directors often prefer this ratio for a more panoramic picture. Several widescreen movies are shot in this ratio, but there are plenty of DVDs available in the other two aspect ratios as well. The best advice is to follow Herman's last suggestion, ignore the bars on the top and bottom of the screen (you won't notice them after a few minutes of the movie have passed) and watch the movie as the director intended. Hope this helps.