Audiophile fuses - Synergistic Black fuses vs the còmpetition


Between friends samples and onew I havd bought I find that these Synergistic fuses to be the best balanced. And without question inner detail .I originally had Hifi tunING supreme.which are good  but not in the SR class 
The Audio horizon I found more tipped up compared in certain areas furutech were no where's as detailed . The SR  Black fuses use the latest in Graphene  technology everyone from Nasa 
To the latest hi tech 3d printing and many 1,000s denser then Copper.Silver or Platinum.
All super computers are now using and soon home computers it is much faster and accurate.
But also smoother and more organic sounding parts connecxion if you purchase at least 3 or more 
May give you a respectable discount. Email Chris the owner at Tech go to the site . Lucky I only had 5 in my system. One thjng that was surprising is that I put one in my JL audio  Subwoofer  thd bass was noticeably more accurate and articulate.  2 thjngs to mention .these fuses take up to 200 hours to fully runin.but after 100 hrs 90% of the runin  is complete, also  Always go up to the next size ,for standard cheap steel fuses can vary up to 15%,where these fuses are typically within 
1%.  I found that no fuses popped .on a Modwright pre I popped 2 , then went from 2 to 2.5A
No problems and Make sure you get proper  slow-timed ,or Fast blow. A No Brainer like a very good cable upgrade and comes with a 30 day money back guarantee. 
128x128audioman58
geoffkai,
Huh... So just because I didn't hear a difference, there had to be a mistake with MY system? I'm not new at this hobby and that's a pretty arrogant assumption. 
FYI, I tried many different orientations with the fuses and Aurender, for the most part agreed with my findings. Maybe I should've told em they put the fuses in the wrong direction. 
Hey, I was just guessing. Why do you think you didn’t hear the fuses? Remember the context of all of this is that not only has almost everyone else who has tried the fuses heard them big time. Follow?

I'm  hoping to meet  "ptss" in person one day so that I can thank him face to face for the "kindness" he showed toward me in the other SR fuse thread.

Mapman ...

I thought you fell off the face of the earth. Nice to see that all is well and that you are using the Red fuse in your preamp. 

Frank
Here is a simple explanation , just look up resistance index in metals .
Silver vs the buzz fuse steel zinc.
The top fuses have ceramic instead of glass far lower micro vibration 
End caps are solid silver .Better then  7x less resistance then Steel.  Meaning 
Resistance  of this amount us a Huge bottle neck creating low level distortions 
With top fuses after about a 75-100 hour runin you get full benefits.
Better separation if instruments, tighter imaging, and better low lever detail.
Think of a 1 inch pipe vs a 1/8th inch pipe .the electrons flow much more at ease 
And these are the results. One thing to mention. The rest of your system needs 
To be addressed quality Audiophile power cords ,interconnects, and dpeaker cables, not monster Cable or blue jeans those are basic  cables.
Engineers are the very worst .I cannot tell you how many say a power cord is a power cord, or capacitors or resistors all dound the same ,breakin is in your mind.
I have spent years molding and listenjng and documenting changes well over 15,000 hours literally. Owning a aufio store until 06 I had plenty of time and having a technician a lot of upgrades . Keep an open mind One more thing the Best 
For your contacts and last for years is Stabilant-22  .I have tried them all 
$55 a bottle .clean everyyhjng including power cords first with high purity Alcohol.
Everyyhjng that has metal clean it ,and coat all surfaces Thin coat. Fuse holder
Included.