Best amp pairing with Aerial Acoustics Speakers?


I have some Aerial 7B's and I have been contemplating upgrading to the new 7T.  Does anyone have suggestions as to what amps pair with Aerials the best?  I have heard a lot of people paired the older Aerials with Classe, Bryston, and Theta.  But now with Theta being mostly Class D amps, and Classe having the same path forward, I wonder of that makes a difference...  

On that note, I would love to hear them with the new ATI class D amps, as well as the Levinson 532H amp. (I haven't heard the amps, but people say they have amazing midrange, which is what Love about the Aerials right now).

I have also looked way off into left field and saw a Plinius SB-301 MkII for sale here as of late...

Anyway, my questions stands.  What amps pair the best with Aerial Acoustics?

128x128jrunr
@jrunr

I would never recommend horizontal bi-amping for efficient / sensitive speakers because it wouldn’t make sense. But for difficult to drive speakers it can be the most cost effective way to go with outstanding results. That is my experience. I don’t say it is the solution for everyone’s speakers but I challenge anyone who says it will never work in any situation.

I am only offering an alternative for you to investigate that I (and others) have had great success with. (If you lived close to central FL I would say to drop by my home and have a listen for yourself.)

To answer your previous question, horizontal bi-amping does not change the impedance of any speaker’s individual drivers, that is fixed. But it does change the impedance load that is presented to each amplifier. I would urge you to do some research on horizontal bi-amping and make a decision for yourself if it seems right for you. Don’t just take the word of advocates ..... or naysayers.

To make horizontal bi-amping work you have to have a couple of features in the system configuration.

1. A preamp that has two sets of outputs to drive two separate amps.
2. The bass amp has to have a built in gain control or you need to have a separate volume attenuation control device between the preamp and the bass amp.

Impedance of any speaker changes over the frequency range which is why a "nominal" impedance spec is not very useful by its self. Stereophile does present an impedance graph for your speakers that is helpful but I have never seen two impedance graphs presented, one for the top end and one for the bottom end in any review. Parts Express caries a software package to generate your own impedance graphs called DATS that cost about $100. I use it on all my speakers, those that can be bi-amped or not to see what is really going on.

Good luck.

So, I know that the Aerials like a lot of current, so what about one of the older Parasound amps?  ex: 2205AT or the HCA-2003A?  Those are supposed to be high current amps, but what will I lose by going with those over the Krell TAS?
When I purchased my 7Bs, I tried running them with a Yamaha MX-1. I would describe that pairing as anemic, my initial impression was that I'd made an expensive mistake buying the Aerials. It wasn't until I purchased the Bryston that I realized their potential, lesson learned. The Parasounds you are asking about may have a little more power, but I would guess about the same results.