HELP AFTER MY MODS, My tweeters are subdued and weak-


So I have a pair of Mirage M1 speakers, I changed the caps in the crossovers to Jantzen Superior Z (for the tweeters) and standard z for the mids and bass.
 
I also changed the internal cabling to Supra Classic 2.5.

First Impressions-  Not burned in yet
The highs are there but really recessed in the background. Theres a song I reference and it has a steel guitar solo, I can bearly hear it through the vocals because its seems recessed so far back.

SO HERES THE QUESTION- Is that a symptom of unburned in cables and or caps, or is that just what Supra cables give you?

When I changed the internal cabling a few years back on the same model speaker, I used DH LABS t14 Silver plated cable, This had the opposite effect, it was super bright and fast, but it smoothed out and the brightness relaxed, leaving a lot of detail but not so much your ears bled.

But here its the opposite, its dull on the top end and the vocals kind of take over and blur out the top end.

idahifi
The device that I posted is called an LCR Meter... It reads  L or Inductance.... Coils.  It measures C  or Capacitance.. Capacitors,  it measures R  or resistance.... resistors or even line resisitance.  A very different device than what imahififan posted
So forgive the stupid questions, I am trying to wrap my head around all this.
So Tim with the meter you listed, do you just measure the resistance between the cap leads? Is the resistance the same as the ESR.
Idahifi,

no. ESR = equivalent series resistance.

It is measured at specific frequencies, and may be different.

Again, i don't know why you are going down this route. Experiment first, replace the caps I listed. See if this fixes things. THEN if that is the problem you'll need to get measurements.

Best,


E
Post removed