HELP AFTER MY MODS, My tweeters are subdued and weak-


So I have a pair of Mirage M1 speakers, I changed the caps in the crossovers to Jantzen Superior Z (for the tweeters) and standard z for the mids and bass.
 
I also changed the internal cabling to Supra Classic 2.5.

First Impressions-  Not burned in yet
The highs are there but really recessed in the background. Theres a song I reference and it has a steel guitar solo, I can bearly hear it through the vocals because its seems recessed so far back.

SO HERES THE QUESTION- Is that a symptom of unburned in cables and or caps, or is that just what Supra cables give you?

When I changed the internal cabling a few years back on the same model speaker, I used DH LABS t14 Silver plated cable, This had the opposite effect, it was super bright and fast, but it smoothed out and the brightness relaxed, leaving a lot of detail but not so much your ears bled.

But here its the opposite, its dull on the top end and the vocals kind of take over and blur out the top end.

idahifi
Btw, all cap in the crossover should be bipolar/non-polarized, therefore the two 2200uf connected back to back.
The negative stripes face each other on the 2200uF's, I'm thinking that's in line with what your saying
Idahifi,

Unless otherwise specified, electrolytics are polar, but crossover caps must all be bi-polar (same as non-polar). :)

You can "cheat" by putting polar caps back-to-back, turning 2 polar into effectively a single non-polar with half the effective capacitance.

Film caps as far as i know are all bi-polar.

The rare exception to this is with battery biased crossovers. Very very rare. :)

Best,


E
Ok,  thanks Sean...again, my argument isn't that ESR doesn't matter, My argument is that it isn't enough to do this.  So, you are saying that you replaced your midrange electrolytics and your tweeters returned? 
To be clear in my own pea brain.