Directionality of wire


I am a fan of Chris Sommovigo's Black Cat and Airwave interconnects. I hope he does not mind me quoting him or naming him on this subject, but Chris does not mark directionality of his IC's. I recently wrote him on the subject and he responded that absent shunting off to ground/dialectric designs, the idea of wire directionality is a complete myth. Same with resistors and fuses. My hunch is that 95% of IC "manufacturers", particularly the one man operations of under $500 IC's mark directionality because they think it lends the appearance of technical sophistication and legitimacy. But even among the "big boys", the myth gets thrown around like so much accepted common knowledge. Thoughts? Someone care to educate me on how a simple IC or PC or speaker cable or fuse without a special shunting scheme can possibly have directionality? It was this comment by Stephen Mejias (then of Audioquest and in the context of Herb Reichert's review of the AQ Niagra 1000) that prompts my question;

Thank you for the excellent question. AudioQuest provided an NRG-10 AC cable for the evaluation. Like all AudioQuest cables, our AC cables use solid conductors that are carefully controlled for low-noise directionality. We see this as a benefit for all applications -- one that becomes especially important when discussing our Niagara units. Because our AC cables use conductors that have been properly controlled for low-noise directionality, they complement the Niagara System’s patented Ground-Noise Dissipation Technology. Other AC cables would work, but may or may not allow the Niagara to reach its full potential. If you'd like more information on our use of directionality to minimize the harmful effects of high-frequency noise, please visit http://www.audioquest.com/directionality-its-all-about-noise/ or the Niagara 1000's owner's manual (available on our website).

Thanks again.

Stephen Mejias
AudioQuest


Read more at https://www.stereophile.com/content/gramophone-dreams-15-audioquest-niagara-1000-hifiman-he1000-v2-p...


128x128fsonicsmith
What on God's earth makes anyone think that directionality in wire can even be heard in audio signals @ KHz frequencies? If its just pure copper wire- and uniform in make, thickness, etc. across a fixed length, its a conductor, and it will conduct both ways the same- assuming all things are equal in the wire and in the "inputs" (i.e. terminations) on each end of said wire.

Having said that, I have seen scientific evidence where in the Southern Hemisphere that electrons flow in the opposite direction than they flow in the Northern Hemisphere.  Obviously, impacted by proximity to the magnetic poles of the earth.  That said, directionality is possible in the farthest parts of the northern and southern hemispheres, and non-directionality is best observed nearest the equator.  I live in Texas and closer to the equator than many in US, and likely this is the reason I don't see any hints of directionality in my stereo IC's and speaker wiring.
Maybe all the believers should move closer to the equator and all the naysayers should move closet to the poles and just be done with it. 

We can then have an audio UN where disputes can be settled, to no ones satisfaction. 👍 But, at least, we would be content in knowing that in our particular neck of the woods, we'd be right.

All the best,
Nonoise
@nonoise  Very diplomatic of you!  Just please let's not let the UN become involved in audio and screw that up too.  We have a sufficient # of issues as it is.
What, nonoise, you are now suggesting I live in wrong part of the world?
 If I have to move, I'm moving to Demark or Sweden, where they have lots of good looking blondes and believe in full frontal nudity... I know which way my pole will orient there.