2. home-theater
  3. 1162839091

Do I need Pro Logic IIx?

I have a 5.1 system and am upgrading my Marantz SR7000 to separate components. I've already picked up an amplifier and am looking around for a second hand processor. Systems with Pro Logic IIx are newer and second hand units harder to find and more expensive than those with Pro Logic II. From what I've read, Pro Logic II supports five speakers and Pro Logic IIx supports seven speakers. As my speaker set-up is 5.1 and I'm not interested in 7.1, would I be losing anything if I pass on the Pro Logic IIx and go with Pro Logic II?
raduray
duane
189 posts
 
Hello,

You don't need Pro Logic IIx but keep in mind that there are a lot more important issues. The most important thing is matching the right components together. certain pre-amps work better with certain amps and that changes with what else is in the system.

Thanks,
Duane
raduray OP
14 posts
 
Duane, I have a B&K 200.7 S2 amplifier. Extra two channels can be used for bi-amping. Right now I have B&W DM580's and B&W CC6 in the front and Design Acoustincs PS-55 in the back, but I'll be updating the speakers next.
lokie's avatar
lokie
511 posts
 
I would reccomend that you use the processor in the Marantz. The SR7000 sounds very good. I don't know what kind of amplifier you picked up but I would reccomend that you use the surround and middle channel amps in the Marantz and use a nice two channel amp for the fronts. You should be crossing those channels over around 100hz to your sub so the Marantz's amps should easily handle the load. This set up will also eliminate 6 interconnects.
cdwallace
216 posts
 
Rad -

It may be an option to future proof. Although you may not be interested in PLIIx or other 7.1 variations, before long these formats will become more available on forms of media. Besides, you can also use the extra 2 channels for biamping until then.

IMO, If the prices are relatively the same between components you're looking at, then it wouldn't hurt to spend a few extra bucks for the extra channels.

The option is yours.
duane
189 posts
 
Hello again,

It would be cost effective to use the Marantz as the pre-amp but don't worry about the extra channels.

If you can sell the Marantz, the first real jump in performance with the B & K amps and B & W speakers would be an Arcam. The Arcam with B & W's along with the B & K amps will sound much better than a B & K pre-amp for example. The B & K pre-amp doesn't sound much better than the Marantz once you’re not using the Marantz amps.

An unbelievable upgrade would be to pick up an older Classe SSP-25 or SSP-30. This would be twice as good as the Arcam and 5 times better than the Marantz or B & K pre-amp.

Good Luck,
Duane
More to discover