Please...dont flame me (Bose 901-Series I help)


OK,

So I absolutely understand the angst that these particular speakers/brand can elicit.

However, these particular speakers (the series I in particular) have always been on my bucket list since my pre-teens. They were my first exposure to anything resembling high fidelity, thus, I have always wanted a pair.

Now in my mid 40’s...ahem....I had a pair dropped in my lap for no $$$. Cherry condition, original drivers and original EQ (crossover).

My quandary is this, I only have this Yamaha RX-V461 multi media receiver to drive them. On paper, the RMS per channel is 100WPC. The issue is, I just do not feel like the speakers are getting enough juice to really make them sing.

Placement and listening room requirements are met, and in all honesty, the sound pretty damn good at high volume. Its just that I get the feeling that the receiver gets a little winded and sounds a little artificial to my ear.

I am hoping that swapping in either a power amp (using the Yamaha as a pre-amp) or an analogue "Beast" vintage receiver will warm up and fill out the sound at all volume levels.

I have this rig set up as a secondary, "just for ----- and giggles" rig. Currently using an MP3 player as a source, with plans for a single CD player here shortly. I used a friends CD player as source prior, so the issue I am thinking is indeed the amp.....i think.

I am hoping that someone here could give me some ideas as to what to look for as a good match up for these speakers. Cheap is good, "sleeper amps" are always a joy, so if there is a little known but desirable rig (think Realistic STA-2100) I am all ears.....haha....get it? All ears.....?
morwatts
mr. Decibel,

Currently, I am playing with two different speaker set ups. First is a clone of the Linkwitz LXmini's. The other is an open baffle set up using Wild Burro Betsys. I built the LXmini clones and am satisfied with their sound. I am forever swapping amps in and out. They are now unplugged and waiting to be returned to service.

The Open baffles are somewhat the same. I am constantly tinkering with various configurations and such with those Betsys.

The 901's are on original tulip stands, and are placed on one of the long back walls of my basement listening room. (15x20, wood floors, plaster over lath walls, 12 foot ceiling). They are placed approx 18inches from the side walls and 24 or so away from the back wall. EQ is installed correctly.

My listening trends toward R&B and Soul, but my first love is jazz....lots of jazz. Bird, Trane, Dizz, The Count.....you get the point.

What I would really like to do is source either a high power receiver or pre-amp/amp set up with a higher end singleCD player as source.

I really just want to play with these for a while and then move them on to someone else to fund some other speaker build project. 

i am no stranger to this hobby, yet in no way an aficionado. All my vinyl went with the ex wife, so my collection is being rebuilt in CD. I just dont have the time or patience to rebuild my vinyl collection. CD player + WATTS+ addiction to speaker building = Goal

Since this is just an experiment, I want to do it as "on the cheap" as I can. Not looking for true audiophile quality. Just crisp, clean, full and LOUD.
Just as an aside, would this little lepai amp drive the 901’s?

https://www.parts-express.com/lepai...with-bluetooth-aptx-and-power-supply--310-298

I’m ordering it to use in another open baffle speaker build I’m doing. I was curious if it had the huevos to power the 901’s.

Edit to say:
I'm curious only because I have no idea how efficient the Bose are. I suspect not very. But if I could drive them with this little box, it sure would go a long way to keeping the wife happy.
The 901s, imo, should be further from the corners, as you are now getting double reflections. I would also try them 18 in. from the back wall. So, you only have the one receiver ? Not familiar with the lapai amp, but try it when received. Do not know how much $ value you will receive for the original 901's ( even mint ), because, the drivers and their surrounds have aged ( just because ). I had 4 systems going not long ago, and, am down to 2, with the 2nd system seldom listened to. I am just enjoying my main rig. Happy listening !
Mr. D.
I'll try tinkering with placement as you describe. Yes, currently just the one amp, I'm slacking on the watts end of my addiction.
The drivers are fine in these. Bose used cloth surrounds in the series I & II and inspection reveals no damage or obvious wear. These were babied it seems.
901 value on craigslist actually runs higher on the first gen 901's. Any of the later, ported versions actually tend to sell for less. $300-$400 seems to be the sweet spot here in Denver for a pair with the EQ.

Yogi,
Thanks for that. Good to have resources to read up on these for when I am tinkering and also for when I sell them.