New Tweak --- Its Fantastic


THE NEW TWEAK

Over the good part of this past year I’ve been beta testing a new tweak, the name of which is "Total Contact." Its a hi-bred graphene contact enhancer that is different from all other contact enhancers that have come and gone for one reason or another. I’m not new to these contact enhancers, having had quite a bit of experience with a product developed by the late Brian Kyle and his "Quick Silver" contact enhancer. The "Total Contact" is different ... a LOT different.

"Total Contact" is graphene based and is not a vibration control. It eliminates micro-arching between two contacts. Micro-arching, much like Micro-vibration smears the sound in our stereo systems. Its the type of distortion that we don’t know is there .... until we eliminate it. There is no break-in as we know it. The sound is improved right off the bat, but what you hear is only a smidgen of what’s to come.

I tested three generations of "TC," each of which was an improvement over the previous incarnation. The final mix was cryogenitically treated and made for a more effective, much smoother application. It comes in a large hypodermic needle type plunger containing 1.5 ml of product and includes a instructional DVD and an application brush.

The application should be applied with a very thin coat to all of your electrical connections .... from your cartridge pins to your power cords. I did my entire system, including the ends of my fuses.

Upon initial application, you will notice an improvement in clarity, correctness of tonal balance and a more overall organic sound. But ... that is just scratching the surface of what this magic paste does. As it cures, the improvements become more apparent. Much more!

There are two real break-through events that happen almost to the day with "Total Contact," one at four weeks and another at eight weeks . At four weeks, you’ll get a real jump in clarity and overall improvement. That’s only a taste though of what’s to come at eight weeks. At eight weeks your system’s focus will make a jump in SQ that is so real - its surreal.

After 40 years in the hobby, and a total tweak nut, I have never heard anything that does what this graphene paste does. The see-through clarity at eight weeks becomes simply amazing. The "paste" eventually cures into a kind of polymer plastic and it seems that the sound improves with each listening session. So, its important that you leave your contacts alone for the duration. If you’re the type of person that continually switches wires in and out, you’ll have to re paste until enough time has elapsed to get "the cure."

The only problem I had was with the first batch and that had to do with shorting out a tube pin in the line stage. Use the "TC" very sparingly on tube pins, if at all. I only had problems with the line stage tube pins. The Amp, CD Player and Phono Stage has had no tube pin problems at all.

Tim Mrock, one of our fellow A’goners, is the developer of the product. Its taken Tim 15 years and several patents to get it right. Tim has "pasted" every electrical contact he can find in his audio system, all of the switches in his circuit breaker box, every contact in his car ... and has used it in commercial applications such as hospital circuit breakers, surgical lights ... and other places where efficiency and long life of electrical components are deemed important.

This product is highly recommended to anyone who truly wants to get the most out of his/her audio systems. There’s enough product in each tube to do at least two audio systems as it just takes a very thin coat on each application to be effective. The last tube was enough to do my system twice and then a friend’s system this past weekend.


Frank

PS: There were a couple of other A’goner beta testers of this product as well. Hopefully, they will chime in here with their experiences for comparison. I "pasted" both of Steve Fleschler’s systems a few days ago, perhaps he will comment on his results too. We forgot to paste Steve’s power cords though, so there’s a lot more to be had from Steve’s two fantastic systems.

Frank
128x128oregonpapa
I've been following this thread with some interest and am in theory interested in using TC in the context of my system (although given it's complexity and number of connections applying TC is not something I'd relish short of a full breakdown if/when I move). 

Anyway I was struck by some of the varying experiences with this, and with other similar system level tweaks (e.g. fuses, footers, damping materials etc) and a possible expalantion of what might be going on

In a nutshell my hypothesis is that for tweaks of this nature (i.e. those that address spurious noise, interference, resonances, subtler room effects and all sorts of potential impediments to hearing what was originally in the recording) far from there being a law of diminishing returns there is in fact a system of increasing returns

What do I mean? I mean that as you reduce noise (I'll use this term to mean all potential sources of non original signal distortion) of all sorts the marginal benefit of removing each additional level of noise is larger i.e. as you can resolve more you gain a greater appreciation of removing each additional bit of interference

This effect should be independent of the absolute level of investment in active hardware (assuming a decent source and resolving speakers, plus enough room treatment that you can hear any type of change)

Certainly it's my experience that the more I address "problems" in reproduction the greater benefit I get from each small tweak (e.g. most recently careful application of foQ material). This also helps explain the "aha"/big change experience sometimes associated with what may seem minor tweaks -- in the context of such an optimized system the change may seem large while in another system no or little effect may be apparent

Of course the other approach to getting to this audio nirvana is to simplify the system to remove potential sources of interference (lets call this a Kaitian philosophy) -- unfortunately not the route I've chosen to go down 😉but if I was to start again it's quite appealing
Folkfreak,

The last thing I wanted to do was crawl behind the equipment again and do all this stuff but after I changed out the duplex outlet and got the gains in resolution that I got, application did not seem so bad. 

As as per the isolation vs power cleanup, I can only tell you about a story involving Still points. I had just gotten the Audience the Ones V2, in the office, and the 1+1 V2+ in the main system. All was fine, but I thought it could use further resolution, so I got four boxes of stillpoint minis, for a week and half long trial from my dealer/friend to float the speakers As per the stillpoint hierarchy. 

Within 4 days I removed them from both systems since I got an ear ache after listening to both systems almost immediately. My dealer had never encountered this in his many years of experience. At that time I asked if I could try out an Audience power cable for a couple of days and it was a substantial improvement, at the time. To make a long story short, the the power got cleaner, over about a year of cable replacements. The stillpoints came back using their hierarchy. They are finally under all components of both systems and no ear aches.

This might be the reason that the TC treatments have made such a profound effect in my system. I’m glad I took the plung. 

I hope this this helps some,

rc
Just calling a spade a spade or do you deny that this thread is purely promotional in nature on your part. You even admitted you get commission.
Hi Tim,

When can we expect to see the video and your website to go live?  thx.