New Tweak --- Its Fantastic


THE NEW TWEAK

Over the good part of this past year I’ve been beta testing a new tweak, the name of which is "Total Contact." Its a hi-bred graphene contact enhancer that is different from all other contact enhancers that have come and gone for one reason or another. I’m not new to these contact enhancers, having had quite a bit of experience with a product developed by the late Brian Kyle and his "Quick Silver" contact enhancer. The "Total Contact" is different ... a LOT different.

"Total Contact" is graphene based and is not a vibration control. It eliminates micro-arching between two contacts. Micro-arching, much like Micro-vibration smears the sound in our stereo systems. Its the type of distortion that we don’t know is there .... until we eliminate it. There is no break-in as we know it. The sound is improved right off the bat, but what you hear is only a smidgen of what’s to come.

I tested three generations of "TC," each of which was an improvement over the previous incarnation. The final mix was cryogenitically treated and made for a more effective, much smoother application. It comes in a large hypodermic needle type plunger containing 1.5 ml of product and includes a instructional DVD and an application brush.

The application should be applied with a very thin coat to all of your electrical connections .... from your cartridge pins to your power cords. I did my entire system, including the ends of my fuses.

Upon initial application, you will notice an improvement in clarity, correctness of tonal balance and a more overall organic sound. But ... that is just scratching the surface of what this magic paste does. As it cures, the improvements become more apparent. Much more!

There are two real break-through events that happen almost to the day with "Total Contact," one at four weeks and another at eight weeks . At four weeks, you’ll get a real jump in clarity and overall improvement. That’s only a taste though of what’s to come at eight weeks. At eight weeks your system’s focus will make a jump in SQ that is so real - its surreal.

After 40 years in the hobby, and a total tweak nut, I have never heard anything that does what this graphene paste does. The see-through clarity at eight weeks becomes simply amazing. The "paste" eventually cures into a kind of polymer plastic and it seems that the sound improves with each listening session. So, its important that you leave your contacts alone for the duration. If you’re the type of person that continually switches wires in and out, you’ll have to re paste until enough time has elapsed to get "the cure."

The only problem I had was with the first batch and that had to do with shorting out a tube pin in the line stage. Use the "TC" very sparingly on tube pins, if at all. I only had problems with the line stage tube pins. The Amp, CD Player and Phono Stage has had no tube pin problems at all.

Tim Mrock, one of our fellow A’goners, is the developer of the product. Its taken Tim 15 years and several patents to get it right. Tim has "pasted" every electrical contact he can find in his audio system, all of the switches in his circuit breaker box, every contact in his car ... and has used it in commercial applications such as hospital circuit breakers, surgical lights ... and other places where efficiency and long life of electrical components are deemed important.

This product is highly recommended to anyone who truly wants to get the most out of his/her audio systems. There’s enough product in each tube to do at least two audio systems as it just takes a very thin coat on each application to be effective. The last tube was enough to do my system twice and then a friend’s system this past weekend.


Frank

PS: There were a couple of other A’goner beta testers of this product as well. Hopefully, they will chime in here with their experiences for comparison. I "pasted" both of Steve Fleschler’s systems a few days ago, perhaps he will comment on his results too. We forgot to paste Steve’s power cords though, so there’s a lot more to be had from Steve’s two fantastic systems.

Frank
128x128oregonpapa
I’ll probably order a (vile).

Based upon the overwhelming responses.

I’ll keep my findings, if positive, confined to myself, solely because of the way @oregonpapa treated me.

Be honest... would any of you who felt good about ordering this product find.... if your initial posts were ignored, then you were told, outright, "We don’t need you"?.. would you even be back to read (this) post?

I doubt it. So, if I order a vile...I WILL NOT post any positive comments here. I will, how ever, post any negative reactions. Why?

Because Frank said, and I quote, "we don’t need you".


..Is he suppose to be a favorite reviewer from the past?...........


slaw,

Holding onto a grudge against Frank (or anyone) doesn't hurt him, only you.
@tommylion,

I understand the reasoning for your post.

But, having this discussion is a positive thing. Right?

I’m expressing my opinion based on Frank’s history. with me.

This is all I have to base my opinions on going forward.

So, in effect, you would have me (buy this product(), with all of the reservations previously noted and not have an opinion on his (attack) on me personally?

It has to do with the manufacturer, his choice of beta testers, how they react to the potential customer base, that will hopefully drive sales?.

For some reason, not yet known to me, you seem to want to make ME the scapegoat for the failure of how this product was rolled out? This is what I’ve said all along.

So, what you seem to want to refer to as a (grudge)..I correctly call it as a failure to understand the initial prospective of a new product and it’s correct influx into the marketplace.

I can take this one step further. Has Frank EVER questioned the posts from customers who’ve had positive experiences??

I don’t think so, Then I ask myself..why not? If Frank is such a respected reviewer, who’d want his reputation preserved, this, my friend, is of great importance?

I guess, I’m the only one who has ever questioned this?

So, I think it's important to actually remember how this confusion actually started. YOU seem to make me, a potential customer, out to be a "bad guy" or as @geoffkait would say, a suedoskeptic?


I’m questioning my previous decision to but a vile now? Thanks @tommylion.




hey slaw I for one fully understand where you are coming from. I have not bought some great equipment over the years based on how a manufacturer has treated their customers, on how a distributor dealt with situations or how a dealer has treated me. There are a lot of choices out there and maybe my system would sound better with product x but there's more to it than the product itself.
@rsf507,

Thank you for your (clear) reasoning!

I'm open to the TC product. Why on earth the ONE GUY the manufacturer chose to beta test/represent this product said "we don't need you",...says a lot about the manufacturer, to be FRANK!

It takes BALLS to write truth here...I thank you!