We Need A Separate Forum for Fuses

I have to admit being a bit surprised by the mixed effects of the fuses in my Rogue amp as well.  All of the fuses used in that component are Synergistic Research Reds.  I've had personal experience a number of times over the years with how important clean AC power is for good sound.  However, that amp is connected to a Shunyata power conditioner with a Shunyata cable.  I didn't necessarily expect the main power fuse to be the one with the most impact sonically.  I only chose to replace that first because it involved the cost of one fuse vs two...  :)

niskymichael, all the more compelling experiential evidence of fuse efficacy considering it was an amp following a heavy hitting power conditioning component. Doesn't surprise me at all. 

douglas_schroeder OP
In all matters of what can be heard in systems we cannot discount the influence of hearing loss, ambient room noise, and the level of equipment. That varies across the audiophile universe, so we should expect a certain amount of divergence of opinion on such things as fuses, even among those who have tried. As for those who haven’t tried, these variables don’t matter. ;)

>>>>Let me add (1) experience listening to and evaluating tweaks, (2) having mistakes in the system, (3) time of day, weather, (4) not following instructions and (5) use of CDs for the test that are in reverse Polarity, which would be what, about half of them? There is even (6) the spectre of reverse placebo effect, the dreaded nocebo effect, looming in the distance. 😬

An ordinary man has no means of deliverance. - old audiophile saw

geoffkait - the notion of diretionality means to favour one direction over the other. If the current travels in two directions, there is no favoured direction, therefore directionality becomes irellevant, hence my use of the term 'indirectional'.

My question to you was how can a fuse demonstrate directionality i.e. to favour a particular direction when the current travels in both. Switching the fuse direction doesn't answer it as if the fuse was directional, there would always be one direction that would suffer - so you're just swapping the problem around.

And I would also go on to say that anyone who suggests that no fuse is best when fuses are put there to protect people from electric shock and potential death needs to think hard about their motivation to make such statements.

Dear Mr Chef, I’m afraid we’re having a bit of a communications problem. I’ve explained what I meant already. You want the fuse oriented so the direction of the current or the signal is toward the speakers. And yes, we know all about why fuses are used. Which is ironic since I don’t use fuses myself. Nor do I have places to use fuses even if I wanted to.