Dedicated Home Theater/Listening Room Suggestions


Just curious to know if anyone would like to share their experiences with wiring and designing a dedicated listing room for 2 channel as well as home theater. I will soon be moving into a new home where I currently have a dedicated listening room roughing out in the basement.

A few questions that come to mind are; Is it worth running separate power circuits for power amps and digital sources from the panel? Anyone know of any info online that maybe of value to this project? What should I use on the ceiling?

Any help would be greatly appreciated.

Thanks in advance.
bunner100
Use a drop ceiling - you never know what might come up in the future, and a drop ceiling will be invaluable. Damping of it is also important.

One of the best resources I've found is http://www.acoustics101.com/

Good luck.
If you are going to the trouble of running dedicated circuits , make sure that you additionally connect them to
what is called an isolated ground . This will segregate the power from the rest of your house and eliminate any noise from other items in your home .

Try to familiarize yourself enough about isolated grounds to be able to hire a professional that actually knows how to do it ! This might seem like a no brainer but few residential electricians have any experience with this circuit . Isolated grounds are usually used in commercial applications , generally computer rooms and hospitals . I went through 3 electricians before finding one that actually knew how to install this type of circuit correctly !
Google is your friend !

You can save yourself some money by running the wire yourself and paying the professional to just make the connections . And unless you live in a sandy area , they usually don't like pounding in the ground rod either !

Good luck .
A few tips:

1) Hire an expert in acoustical engineering. I used Rives (of Rives Audio) for my dedicated two channel optimized Home Theater and I recommend him heartily.

2) A great book is "The Master Handbook of Acoustics" by F. Alton Everest. It contains everything you need to understand acoustics, but it won't give you the practical first hand experience that a degree in the subject and/or years of designing rooms in the field will give you (refer back to tip #1).

3) You can check out my AVScienceForum thread on building my own room from the Rives Audio schematics. I went with a level 2 consultation, but if you can afford to do it, I would go with the level 3. Looking back, this would have been the best choice to ensure that the utmost care was taken in all the construction. It ended up being a lot of insane work on my part to understand everything being done with the F. Alton Everest book, since I decided to General Contract my own room. I wanted to make sure everything was done according to exact specifications so that the acoustics wouldn't get botched by over-creative builders who thought they could sometimes use any material lying around to create approximations of the designs instead of using materials specifically mentioned on the schematics (or specified by myself or Rives).

4) It is better to do it right the first time, than to be unhappy with the mistakes and results that are the product of amateur/unexperienced work and design (refer to tip #1).
Just finished my dedicated room a month ago & could not be happier. Ran all dedicated lines (14 total),sup panal with an isolation transformerfor. No need for a power conditioner.
I would love to share my research & construction with you, email me & we can exchange #'s
Dedicated wiring might be theoretically nice, but I doubt it will make an audible difference unless you have an unusual problem. I'd spend my money on acoustics that will make an audible difference.

db