High Fidelity Cables CT-1designed by Rick Schultz


In December 2011,I wrote that High Fidelity cables led by cable designer Rick Schultz was putting together a new cable.The cable came to market as CT-1.The CT-1 has FINALLY made it into my system!I had obtained a version of the prototype that Rick had been working on.It blew my previous reference Genesis by Virtual Dynamics.I thought I had finally found my end with this cable.This prototype delivered to my ears "Nirvana".Could I be at the end of my quest for the ultimate sound?
No. I received two pairs of CT-1 to replace my prototypes.They went into the system this past Friday.Unable to dedicate time until Sunday listening,I stole a few moments,ducking away from company with anticipation.My guest could tell even with the music set for"ambiance"something was intriguing and I was in for a treat!
The experience:
First off,CT-1 was very user friendly.Installation was simple;the cable is very nice and light.The female RCA fit beautifully unlike any I had found in other cable.It was secure and reliable.It seemed much thought was dedicated to developing a designer fit to an aesthetically stunning RCA connector.Install entailed a few wiggles to ensure what seemed like a compression fit on my RCA.
It was 2-3 hrs. for the 1st step of break in to be complete.At that point I had something different!Today,although they only have 10-12 hrs. on them,I can`t put into words how much my system has transformed.Believe me,I loved my prototypes.However....there is simply no comparision.
The clarity and sound is so natural.
The soundstage is like nothing I ever heard.Resoulution is breathtaking and inner detail is simply hard to believe possible.
The sound has transended and now it simply does not seem as thought I have speakers.
My system is musicians playing music.
I am told with time they will improve and I trust that as it was revealed with the prototypes.I wanted to share my thoughts with you that now.
Unequivocally,a testament to High Fidelity,as the name declares.
High Fidelity Cables for me,the last word on it,after 12 hours!
Truly Amazing

Al
alpass
As the "Affordable Audiophile" I own a set of the HFC Magnetic Adapters. "100%" is a modest measure of the improvement.

My findings: Magnetic Adapters will create a Holographic Soundstage, eliminate the noise floor, and expand the musical presence after 200 hours of signal, burn-in.

This test was conducted with a vintage receiver, and a pair of 40+-year-old Advents, using the cheapest Monoprice interconnects they offer. (Digital coax and RCA  interconnects).

I challenge anyone to test out a set of Magnetic Adapters on ANY stereo system, and if you don't hear the same improvements, you may have hearing issues.

I tested an HFC Titanium interconnect ($6K) for 72 hours, and I can honestly say that the synergy of the Magnetic Adapters came very close to the level of improvement I experienced with the Titanium.

I have also heard the improvement that Rick's CT-1 Ultimate Power Cable had during a brief visit.

I will be testing the newest CT-2 interconnects, on my system with Reveal speaker cables replacing my Nordost Valhalla Reference Speaker cables, and a Reveal Power cord, as neither the speaker wires or stock power cord have any HFC influence.

The point is-- Magnets Make More Music, and More Magnets Make even More Music.

In the last century, Tesla and Edison fought the nasty AC-DC battles.

Most folks could not understand the science of a filament light bulb making light, but when hooked to this "electricity" it made a dark room light. 

Magnetic Innovations and the inventor Rick Schultz are similar to Tesla...misunderstood by the masses, yet anyone who has heard the Magnets will agree...there is an improvement in Sound Quality, Soundstage, and Transparency.

Any stereo, no matter the price, will be improved by the use of HFC Magnetic Innovations.
Period.
Drop the Magnets.

"What about new CT-2 power cords? Any experience?"

I am doing the CT-2 interconnects, and Reveal Power Cable.



"In an experiment utilizing an RCA cable with one connector 100 at each end of the cable, nickel and gold plated neodymium magnets were used for the active signal pin in the RCA connectors. Upon inserting the cable into an audio system, there was a noted performance enhancement that provided the listener with increased musical detail and clarity, when compared with a using an RCA cable with standard RCA connectors having non-ferromagnetic, non-magnetized pins made of, e.g., copper, silver or brass. Potential benefits of using a permanent magnet in the circuit path with active (data or power) signal contacts such as pins and sockets may include improved signal to noise ratio, lower total harmonic distortion, lower intermodular distortion, an increase in low-level resolution, lower losses in the cabling, lower resistance in the connections, and a potential increase in energy efficiency, for example." -- https://patents.google.com/patent/US20160219701A1/en?oq=20160219701
I’m listening to,the CT-2 interconnects and wow. They sound great. They are open and clear with a lower noise floor than the CT-1. Then they also have better treble extension. This is a great interconnect Cable definitely and improvement over the ct1