New TV: what to do with TOSLINK optical output

I use this excellent Toslink cable:

https://btpa.com/TOSLINK-XXX.html

to go from my smart TV to this reclocker (which lowers jitter for dolby digital as well as PCM):

https://ifi-audio.com/products/spdif-ipurifier/

Then this low-jitter signal is sent using my excellent $275 BNC-BNC coax cable with adapters to my SS processor. It is important to have a 4 foot cable to reduce jitter from the cable. Incredible surround-sound for movies.

You could also cable to a PCM DAC, but I would use a Synchro-Mesh reclocker instead of the iPurifier if you only need PCM playback. Lower jitter.

Steve N.

Empirical Audio

Those really cheap $8 toslink to single-ended RCA convertors that uberwaltz is showing are basically really cheap garbage DACs.  mrgreenfur can certainly try one to see if the audio is acceptable, but it is definitely not going to be anywhere as good as a separate DAC or even a new receiver with toslink/HDMI inputs.  It's something you can try "for the heck of it".  If sound is bad, you can always upgrade to something else.

The FiiO D3 may be better than the $8 solution, but you still can only put so much into a piece of equipment for a $20 retail.

Another thing.  I know caphill like to present the idea of using an "all HDMI" receiver solution.  Keep in minds that audio transported through HDMI will never be as good as audio transported through digital COAX or even toslink.  It's definitely a convenience thing, but I would suggest getting a receiver that has a toslink input and find a really good glass fiber toslink cable (lifatec / Wire World / etc.).