you could go to your local audio shop or electronics shop and get some smaller banana's and solder them on the speaker wires if they fit into your speakers. or you could order some nice binding posts from partxnection and have a shop replace the ML's binding posts. not a big job easy if your handy with a soldering iron.
Problems with Martin Logan ESL speakers accepting a banana plug?
Purchased Martin Logan ESL speakers and tried to use a banana plug that fits all of my other equipment (Esoteric, Audio Research). When I contacted Martin Logan, I was advised that I may have to use force to get the banana plug into the connection. I had to use such force as nearly bent my speaker wire at the banana plug connection and was only able to engage the banana plug by ~ .125"!!! Purchase pin connectors and attached the spades to the pins and found the pin connectors were far too loose. Interested in what others have tried and/or found to work. Note that these are the lower end ESL’s and not the one’s costing $10K+. Thanks.
- ...
- 6 posts total
I also find it very tight, and this type of banana plug seems to fit better https://www.madisoundspeakerstore.com/images/products/bp-sz-r.jpg I also leverage deoxit as lubricant to help. |
- 6 posts total