2. misc-audio
  3. 139527-118236

Power Conditioners: Audioquest Niagara 5000 or Shunyata Denali 6000S

I’ve been trying to decide which of these two power conditioners might make a better purchase. Do any of you own either, have chosen one over the other, or better yet, gotten to A/B them? I’ve found some, but not a lot, of information online comparing the two. So I thought I’d ask if any of you might know something more.

They both come in at $4000 retail which is my budgetary limit. The Niagara is active, the Denali passive. Some threads compare the Denal a little less favorably to the twice as expensive Audioquest Niagara 7000, for what that’s worth. I heard that the Audioquest Niagara 5000 may hum or buzz under some cirumstances. Anybody have that issue? I’ll probably never get a chance to demo them out here in the hinterlands so I’m hanging on your every word before I drop another wad of cash on one or the other.

There is also an Audio Magic conditioner at the same $4000 price point, but I didn’t quite understand it’s function in comparison to the other two. I’ll have to reread that product description.Someone else recommended a Richard Gray model that confusingly turned out to be a giant-sized surge protector.

Anyway I’d appreciate if any of you have any input on this somewhat obscure topic of power conditioners. I’m looking at one of these two power conditioners as opposed to a regenerator, or pure isolation transformer, or other type of line conditioner. If it’s of any import my equipment is a VPI Classic 2 SE turntable with an Ortofon 2M Black moving magnet cartridge, a Marantz SA8005 CD player, a Luxman 507uX Mark II integrated amp, and Magico A3 speakers all to be on a dedicated line and plugged into the conditioner. I am not interested in purchasing used.

Thanks for any input or advice. I hope someone out there knows something about these two.

Mike
skyscraper
whart's avatar
whart
1,930 posts
 
Mike- I used a series of Shunyatas circa about 2006?, but after I installed dedicated lines and changed my electronics, I found I didn’t need the conditioners; the amp manufacturer cautioned against using any as well. But, Shunyata products have no doubt improved in 12 years. At the same time, I know that lots of people use the conditioners only for front end or digital components to avoid current limiting their amps. I guess it also comes down to how bad your ’dirty’ power is to begin with.
I do think that home trial would be the way to go before shelling out for one of these at around 4k, even if it means you are paying more.

skyscraper OP
219 posts
 
Inna, I will be obsolete myself in a few years so I really need to get something now. I have no idea how to evaluate the power supply, so I am willing to accept a well reviewed panacea of a noise conditioner.

I’ll look up the Walker Audio motor controller right now. I generally prefer to stay with bigger well known companies so there’s a decent chance they’ll still be around in twenty years for parts or repairs, if I still am. Some of the smaller companies disappear when their owner retires or moves on, then you’re stuck with a $4000 boat anchor. By the way, I did order the VPI power cable you suggested in my other thread just the other day.

I looked up the Walker Audio motor controller and it did read like an excellent product, and better than any like product I’ll ever have. I’m thinking I’d like a more general purpose product though as current budget allows. Thanks again Inna,

Mike
inna
5,245 posts
 
Whatever Lloyd Walker does is at least good. His turntables are among the very best.
You mean VPI tonearm cable.
If the voltage in your house is unstable you need to stabilize it, just a conditioner won't do it.
skyscraper OP
219 posts
 
Yes, I did mean the tonearm cable. I don't know that the power is unstable, we do have a fair amount of outages though, some of very short duration.

Mike

inna
5,245 posts
 
That I think is easy to measure with a simple device. Each piece of equipment will react differently to voltage fluctuations, and of course it will also depend on the degree of fluctuations. My turntable doesn't have much tolerance for it, nor does my integrated amp. The tape deck doesn't care much unless it is totally out of control.
Your amps power supply should be quite good. But it is not Lamm amps that Whart has, those power supplies probably cost more that your entire integrated. That's why he abandoned even best conditioners of the time.
More to discover