http://www.humblehomemadehifi.com/Cap.htmlI always wonder how he had time to go over all of those caps. Reading his reviews is a humbling experience.
- ...
- 132 posts total
Sorry guys, busy lately as i need to travel extensively due to job requirement. I therefore have to postpone my project to next year. Holco, can you advise how to gain access to the crossover? I can not find any opening from the bottom of the speaker. I tried to gain acess via the radiator but unsucessful. After removing the screws of the radiator, the radiator still stuck to the speaker box enclosure. It looks like it was glued to the enclosure. I dare not force open it worrying it may damage it. Your advice is highly appreciated. |
Regarding access to XOs for the 2.4, here are Rob Gillum’s instructions to me: “The crossover can be accessed through the passive radiator opening. The base is not removable, as it is screwed, and glued. To access the crossover, you must remove the passive radiator screws and let the passive radiator drop into the cabinet. It can be rotated 90 degrees, and removed while servicing. To re-install the passive radiator, you can place your fingers at the surround, pressing outward to hold in place while re-installing the screws that hold bit in place.” I would add two things, 1) be patient rotating the radiator to get the right angle for removal; 2) you don’t need to be overly paranoid grasping the radiator surrounds as I was initially. Not nearly as delicate as I first imagined, albeit still need to exercise care. |
desmond888, The instructions beetlemania posted are the correct way to get acces to the crossovers, the radiator was also a bit sticky on my loudspeakers, but with a calm forge thru one of the holes they game loose. |
- 132 posts total