I used Powerline Adapters for the first couple of years but they were problematic. It turns out that when the signal crosses a breaker there is a significant drop, something like 40%, and to get from my router to my listening room required a 2 circuit jump. The PLAs would work for a while, then ultimately overheat and die after a few weeks. If your listening area is on the same circuit as your router you probably won’t have any issues. I ultimately bit the bullet and paid a few hundred bucks to Ethernet Wire the house, which helped my Apple TVs, Blu Ray Players, and some non Audio IT stuff in the house.
I’m having my first problem with Bluesound since the above cabling issue. The color scheme on the Vault2 cycles between red and blue, it’s overheating, and the app isn’t working. This started Dec 23 when I did their latest update, the one to add AirPlay. I first noted the issue on XMass Eve and haven’t been able to fix it with the usual rebooting of the BS and the router. I’m off today and hoping Tech Support is available.
I’m having my first problem with Bluesound since the above cabling issue. The color scheme on the Vault2 cycles between red and blue, it’s overheating, and the app isn’t working. This started Dec 23 when I did their latest update, the one to add AirPlay. I first noted the issue on XMass Eve and haven’t been able to fix it with the usual rebooting of the BS and the router. I’m off today and hoping Tech Support is available.
