2. analog
  3. 1430204776

JVC TT-101 Won't Stop

The Stop button on my recently purchased QL-10 doesn't work. It worked at first after the TT warmed up, but then quit completely. I since have replaced all 37 electrolytic caps on 3 boards, but it made no difference. The power voltages are correct. The button itself is fine and shorts pins 6 and 9 of the P8 connector on the main board, but the motor doesn't stop. What could be wrong? Any particular transistor or adjustment? Please help! -Alex
safesphere
best-groove's avatar
best-groove
236 posts
 
@gary7

does the selector work to display the rpm that is placed under the plate?
gary7's avatar
gary7
49 posts
 
 You mean the Run/Hold switch? Yes, it does.
gary7's avatar
gary7
49 posts
 
Set on Run.  https://www.youtube.com/watch?v=oUpecva3Atc&feature=youtu.be
best-groove's avatar
best-groove
236 posts
 
@gary7I

saw the video, I could be wrong but I think that once the speed of 33.33 Rpm has been reached, the display should remain locked at the speed and not restart.It would serve the opinion of TT-101 owners working as @lewm 
chakster's avatar
chakster
2,482 posts
 
I could be wrong but I think that once the speed of 33.33 Rpm has been reached, the display should remain locked at the speed and not restart.

You're wrong. Not in this mode
More to discover