2. analog
  3. 138748-18254

FR64 cartridge suggestions

Been out of the loop for quite a few years due to some 'life' events, with system in storage.

I have been able to pull my system from storage, and last year worked enough overtime to upgrade or purchase new equipment, but I have not upgraded my turntable/tonearm/cartridge yet.

My turntable is a Technics SL1000 MKII which for those not familiar, is the Technics SP10 MKII turntable mounted on a factory plinth.
I have two Technics B-500 bases with an 'E' armwand and 'H' armwand that I don't use.
The tonearm I do use is a Fidelity Research FR64, so I need a low compliance cartridge.
The cartridge I used last is a vintage Fidelity Research FR-1 MK3 F, which needs to be re-tipped, and I will do so once I get a replacement.

The rest of the system includes:

Zesto 1.2 Andros tube phono stage
Zesto 1.5 tube preamp
Quicksilver V4 tube amps (new KT150 version)
Green Mountain Audio Continuum 3 speakers
JL Audio 113 Fathom subwoofers (pair)

Curious what cartridges other high mass tonearm owners are using, especially those who use Fidelity Research FR64/66 tonearms.

Looking for cartridges under $2000 USD at most.. probably should spend half that.

I have over 20K records, so I am very anxious to get this back into service.

Really curious about suggestions and thanks in advance.



128x128rich121
Post removed 
rich121's avatar
rich121 OP
68 posts
 
lewm,

email sent.

Not sure if Colby wouldn't be the best bet, but still hope that Tien will come thru... I have been pressing for a fix for quite awhile and my patience is waning....  

:)
solypsa's avatar
solypsa
43 posts
 
If there is a list for a new B60 guide pin from Tien I would like to be on it!
nandric's avatar
nandric
3,263 posts
 

My recommendation is Ikeda 9 C , cantileverless kind.

See latest post by ddriverman in FR carts thread.

BTW I assume that you mean with FR-64 the 64S (S=steel).

There is also an FR-64 with aluminum arm wand and round

lateral balance.

chakster's avatar
chakster
2,482 posts
 
You can buy silver cartridge leads on eBay. They are a product of either Yamamoto or Oyaide; in other words, the source is reputable. No need to purchase an entire headshell. In fact, I don’t know of any of the better Japanese-made headshells that come with silver leads. @lewm



This is a nice set of Silver Lead Wires made by Audio-Technica, i think they are from the 80’s. I’ve bought two sets (NOS). Has anyone else tried them ?

There is a nice Audio Craft headshell which i am happy to use on high mass tonearms. That models designed to solder leadwires directly to the headshell pins (less connectors in signal path). This is a dual-lock headshell. I think it's top quality. 
More to discover