2nd the perspex, currently running one with Hana mc, sounds fantastic. Totally adjustable and able to take advantage of mant different carts.
Looking for a mid-priced TT to install my 2M Black Cart
I am in the process of shopping of maximizing the value of some of my second system and doing some strategic upgrades. my first TT was the Project Carbon Debut DC with an Ortofon 2M Red (MM). I upgraded that to the 2M Black (MM) and it turned it into a great rig (to a point).
I am very aware. that the 2M Black exceeds the capabilities of the TT, so as I optimize this second system, I am looking for a good turntable that would provide a significant sonic improvement over the Project Debut Carbon, and would match well with the 2M Black. I would like to keep it below $1500 (ideally under $1000).
I am leaving out the other details of my system to keep this focused on the TT and not have this turn into a poll of what part of my rig's chain I should optimize next... ;-).
Just want some TT options under $1.5K that will help the 2M open up even more!
Thanks!
I am very aware. that the 2M Black exceeds the capabilities of the TT, so as I optimize this second system, I am looking for a good turntable that would provide a significant sonic improvement over the Project Debut Carbon, and would match well with the 2M Black. I would like to keep it below $1500 (ideally under $1000).
I am leaving out the other details of my system to keep this focused on the TT and not have this turn into a poll of what part of my rig's chain I should optimize next... ;-).
Just want some TT options under $1.5K that will help the 2M open up even more!
Thanks!
- ...
- 46 posts total
Bsmg Watch these two videos, this table is a Denon DP80 modified into a GrooveMaster Vintage Direct DP80 Professional. https://www.facebook.com/170947997876/videos/pcb.10154978720007877/10154978712417877/?type=3&the... https://www.facebook.com/170947997876/videos/pcb.10154978720007877/10154978713202877/?type=3&the... The Tachometer on the Turntable is a Roadrunner - double checked by a Time line - there is no belt drive that can do this - especially not a single belt one. Good Listening Peter |
Well, guys, I’m not cutting new vinyl on my turntable; comparing how records are made to the pros and cons of belt vs dd is a strawman argument. I understand that dd is higher torque and more stable speed but higher torque is not necessarily needed to spin a single record; a belt drive table will assume correct speed quicker than you can lift the tonearm and put the stylus on the record. Furthermore, if your platter has enough mass, its own inertia helps keep it running at the same speed. DJ’s use direct drive tables because they can physically turn the platter backward, which can’t be done successfully with belt drive. If you go to mfgr websites like VPI or Oracle or Pro Ject or Music Hall or ClearAudio, you will note the lack of dd tables. Even on the Japanese sites MOST of their tables are belt drive. This whole subject is similar to the perennial argument about whether tubes or solid state sound better; most ss amps have a distortion factor of something like .0001% whereas tube amps distortion figures are typically "less than 1%." A difference of several orders of magnitude. My speedbox accuracy of .001% is a similar order of magnitude difference (.001% of 33.3RPM is a very small fraction of a revolution per minute). I will stick with vacuum tubes and belt drive and there is nothing that will make me change. To address the question of what made me "switch" to belt drive, I've never had a dd table; never wanted one. Plus, when you flip the switch on your table and nothing happens, you are faced with a substantial repair cost; if that happens to me, it is likely I am looking at maybe $25 to be back in business. Also, back into the initial parts of this thread, someone suggest the OP get a different tonearm; the Debut table he has cannot accept a different arm; there is no provision for that on that model. |
- 46 posts total