KLE RCA plugs are the real deal!!


I ordered a set of KLE RCA Pure Harmony plugs to use for a pair of interconnects using Duelund 16ga wire. I previously built a set, with good results, using standard switchcraft plugs. The difference, even without break in, was staggering. Although the Switchcraft plugs sounded good themselves alone, however, when doing a direct comparison to the KLE's, the difference is clear. The cables using the SC plugs sounded harsher (especially on high end) when compared to the KLE. The cables seem to have a "free-er"(FLOABT) sound or more flow. Seemed as if the SC's were holding something back. 

As far as building the cables, the separated solder posts make things way easier. Everything is quite compact (especially for larger wires) in the SC plugs. The removable grommets are a nice feature if one wants to use thicker cable wraps, shrink tubing or shielding. 

One other area I think the KLE's are great for is trying wire combinations without soldering. With the "V" shaped solder posts, one could "wrap" the ends somewhat snug and use the wire locking screws. You would still have to be very delicate when hooking up...however this is something that is pretty much impossible with the SC's. 

As I plan to build my entire system's cables, KLE will be the plugs I use on everything. I highly recommend
aberyclark
Goodness that opening is big enough to fit a 12 gauge twisted pair. I have done it .... with a shield! Most ICs are made with16gauge and thinner. That is my point. I even made a double run 16ga set using the Schroeder Method. Fits easily. Confused with this one for sure. However, I suppose if one starts adding Thicker synthetic coverings space could be an issue. I have found these types of coverings hurt the sound however.

I never use the screws as they are not enough strain relief IMHO. I always use a nice double wall adhesive lined heat shrink. 
I agree. Opening wide enough to run a water line thru it. I did use the screws on my first set with good results. I may heat shrink over the ends the next time around
Of course these plugs sound good.  You convinced yourself (based on online reviews) that the results were to be jaw-dropping and, or course they were.  Probably better to go to Monoprice or Amazon Basic and get the the wire with the connectors.  Likely that would be way cheaper, would sound as good and you would have matching equipment.
@grannyring  What did you think of the cables you made using the  Schroeder Method?  Any significant difference or improvement?