2. cables
  3. 139943-118074

Any good right angle power cables?

Im looking for a high quality power cable for a Yamaha ysp-5600 soundbar. I a/b tested with a few different types of Shunyata cables on the soundbar and heard an obvious difference and want to upgrade, but the power cable sticks out and wife wont have it. Any good cables that are angled without an adapter (would rather invest money toward cable than an adapter)? If not... are there any adapters that are recommended? On that note...any power cables recommended for this sound bar?
deanshias
lak's avatar
Ag insider logo xs@2x
lak
3,516 posts
 
I second the idea above regarding purchasing a ninety-degree adapter and then plugging in your straight power cord?
mcgal
189 posts
 
I purchased a Voodoo 90 degree adaptor and just connected it to a straight power cord. It worked great.
steve59's avatar
steve59
268 posts
 
I had a ysp-1 for 13 years that finally died and I replaced it with the ysp 5600 yesterday and the power outlet is on the opposite side! I screwed myself burying all the cords and cables in the wall and only routing to 1 side. I guess I could cut the female end off the buried cord and male end of the new cord and hardwire them together, or I could take the mantle apart and run the new cord down the other side.rats.
marktunis's avatar
marktunis
6 posts
 
Furutech angled connector, I use em
Best,
Mark
benjie
206 posts
 
Any angled adapter will do. The distance is so short it will not have any negative effect on your power cord. I have used expensive adapters and cheap adapters and I could not hear or see any difference between the two. Save your money for some other future upgrade that will make a difference. Just purchase a generic 90-degree adapter.
More to discover