2. cables
  3. 146432-89202

Looking for more transparency.

I’d like to achieve more transparency in my set.  I’m thinking a change of cable(s) might help.
Right now I have Morrow MA 4 Interconnects between components, and Morrow MAP 2 power cords from my monoblock amps.
My set consists of a newly Teflon capped Conrad-Johnson PV 11 preamp, Nuforce 9v3 class D monoblocks, Gumby Multibit DAC, Arcam streamer, Oppo 105 for SACDs, Cyrus transport and GoldenEar Triton I speakers with Cardus speaker cables.
128x128rvpiano
sgordon1
144 posts
 
What does "transparency" mean to you?
tuberist's avatar
tuberist
79 posts
 
SGordon  +1

rhljazz
1,117 posts
 
The Morrow interconnects are excellent in my experience.  I use them on all my source components except the turntable which has a captive harness.  I seriously doubt you would find much of an improvement starting there.
A different power cord might be worth experimenting with.  If you want to spend big bucks, a Shunyata Hydra Triton is an indispensable part of my big system.
Good luck on your quest.
boxer12
1,703 posts
 
Resonance control helps a lot as well. Not sure what "feet" you are using under your equipment, but you may want to look at improving them. Lot's of opinions about what works best but for me I've had great results with isoacoustic products. They are relatively inexpensive as well.  
soix
2,133 posts
 
+1 @jond -- maybe you can demo something like an ARC preamp.  Lots of other good tubed preamps out there that will give you more detail and transparency albeit with possibly a tad less warmth and fullness.  Always trade offs. 
More to discover