Hi efficient speaker, bass problems


I know i'm going to take a severe tongue lashing for asking this question but . Is it me , whenever I hear low efficient speakers they don't seem to have a grip on the bass like less sensitive units ? The amount of bass is there , and some have good weight , and punch , but where is the control ?
tmsorosk
Timlub,

The VMPS and the Legacy have multiple drivers so i can see them being able to achieving all 3. Klipsch ? I don't think so...

Regards,
"Because all high efficiency speakers have an uneven bandwidth when being driven..."

This depends of the thermal and mechanical power handling capacities of the drivers used. For instance a 4" fullrange driver with 1/2 mm of linear excursion and 30 watts power handling is going to go non-linear long before a 12" prosound woofer with 9 mm of linear excursion and 900 watts power handling. The latter will probably remain linear to a far higher SPL than most similar-sized low-efficiency home audio woofers.

Duke
dealer/manufacturer
The latter will probably remain linear to a far higher SPL than most similar-sized low-efficiency home audio woofers.
-Audiokinesis

Please define Low efficiency,

Have to disagree here, most domestic homes speakers ( good ones) will not have any issues with power induced linearities at domestic listening levels.

regards,
Sorry , should have said High sensitivity speakers . One of the above posters mentioned amps , and yes now that I think about it the high sensitivity speakers that friends use are being powered by low powered amps .
In that case it is prolly a function of amp output impedance and not
power. Tube amps, especially set amps are of high out put
impedance. When this reacts with a speakers impedance which can be low in the bass and higher in the treble (without a zobel network which
wil lower efficency) the result is a less controlled and responsive
bass.