Pioneer CD & DVD as Transports


Looking for inexpensive transport for redbook to a non-oversampling DAC. Which Pioneers are most worthy overall, and which are best value?
If only to be used as a transport, do the newer models hold much advantage over the older ones? Cheers,
Spencer
128x128sbank
Thanks guys, keep it coming.

I didn't know that Ayre & Esoteric use Pioneer transports. That seems like a pretty good endorsement.
In the past I've heard good sound from the DVD535 & DVD525 both paired with BelCanto DAC2. These can be found really cheap ~$30 on ebay. Figured by extension that the Elites would be even better.
The old PD65 got plenty of good commentary, but I figure newer models might have lower jitter.
I'd crossed the most of the Sonys off my list based on comments that they don't read CD-Rs well. Is that the case w/the S7700?
The Ack Dac, which are at the top of my list for DAC, mate well w/the inexpensive Toshiba DVDs, according to Chris from Ack. He hadn't tried them w/Pioneers. Other insights? Thanks,
Spencer
The only CD-Rs my S7700 had problems with reading were the blank faced Phoenix CD-Rs I recorded 8 years ago on my Philips CD recorder.
The rest of them read fine.
I liked the Mitsui music CD-Rs the most for their sound qualities.
Just thought I'd mention that Esoteric does not use Pioneer transport mechanisms. Esoteric is the high end marque of TEAC and TEAC makes its own: the famous VRDS in a diverse array of models; these are then used by ultra-high-end marques like Wadia.

Regards,

Joel.
Joel,

Incorrect. Esoteric does OEM and use the Pioneer Transport and associated DSP servo circuitry in the DV-50 and DV-50S models. This was most likely done because of a price point to meet and for production. This is same transport mechanism that is in the cheapy Pioneer DV-563, 578, pioneer dv-45a, dv-59avi, muse 11 etc..

There is nothing wrong with this transport mechanism. It is ROCK SOLID! and reads every disc, every time, right gmood1??

Esoteric does utilize a different clamping system for the disc, which should improve vibrational characteristics.

The VRDS transports/circuitry costs WAY much more to build and implement, since this is done at TEAC and not mass produced like with the Pioneer OEM models, and then TEAC upsells the VRDS to Wadia who then put them into their machines (which are not cheap! we are talking about a second mortgage here!) . This has to be one of the reasons they have a $13K msrp on the higher models.
Flye,
Thanks, good info. Do you have any idea how much difference I'll hear between these units(e.g. DV45a vs. DV47 vs. 563) if they are all just used as transports?
How much of the sonics are based on "the transport within the player" vs. other aspects of the design & construction.
I'm trying not to overpay for the internal DACs that I won't be using in the DVD player.
Thanks to all,
Spencer