Magnepan MG1.7 fuse question


I have placed an order for a pair of 1.7s. I want to upgrade the fuses but I don't know what spec is shown on the back place for the fuse. One person thought the spec was for a 4amp but I thought that seemed high. Could someone please let me know what the amp size it is. I assume it's a fast blow. Any help would be appreciated.
5560
If you don't playback at very loud volumes that drive your amp to clipping you do not need any fuse at all!

I suggest brass or copper tubing cut to length in place of a fuse.

Fuses only degrade the sound IMO.
Don_c55 - one should NEVER tell someone to bypass the fuses on these speakers without knowing the full story. The tweeter(s) will fry anytime that the amplifier clips and not knowing the amp being used or the listening levels, the best though on this should be"run your speakers and amplifier for 6 months and if the fuse never blows, you MIGHT consider by-passing it for even greater performance gains."
Just added 4 jumpers from Karl at Empirical Design to my 3.7's. Have listened about 10 hours worth. I'm hearing a little more pronounced midrange and a bit smoother highend. Nothing earth shattering but definitely a change. He also mentioned that if I was interested in another tweak that I should look into the Supreme HiFi fuses.
@Jwpstayman If you are driving the amp into clipping, you are an idiot, and certainly not an audiophile!
The back of the panel is a 3AG Fuse 4amp. One recommendation I can suggest to you is the Furutech TF-4A (32mm), would be a great upgrade from that. We sell them if you are interested.