Wattgate 381 v. Hubbell 8300 cryogenically treated


Wattgate 381 v. Hubbell 8300 cryogenically treated

The Wattgate 381 (non-cryogenically treated) and the Hubbell 8300 (cryogenically treated) sounded SIGNIFICANTLY better than the standard (non-cryogenically) treated FIM 880 and Hubbell 8300 outlets.

I could not distinguish the difference between the Wattgate 381 (non-cryogenically treated, $148) and the Hubbell 8300 outlet (cryogenically treated $60). They both added GREAT synergy to my system.

All 12 of the well-recorded CDs I listened to (that I use for demo comparison purposes) sounded as if the volume had been turned up one or two clicks at the preamp, resulting in a much more lifelike performance. There was more detail in the lows, mids and highs, and I heard a sweeter timbre and background accompaniment I had never heard before. The sound was not harsh, and the bass was bigger and deeper. I suspect there had been a lowering of the noise floor (blacker background) which improved my ability to hear the performance in greater detail. I can’t explain it but the Wattgate 381 and/or the Hubbell 8300 outlet cryogenically treated (done correctly, 24-48 hours @ -324) IMO will be an improvement over the same outlet/or other outlets that are not cryogenically treated.

Next I want to have my standard Hubbell 8300’s, Wattgate 381, and FIM 880 cryogenically treated.
One note, the Hubbell 8300 (cryogenically treated) took three days to break in and sound pleasing.

Associated equipment:

First Sound Presence Audio Linestage I
Wadia Transport #20
Dodson Audio Model DA-217 MK II D
Cary 2A3 Monoblocks that sit upon SP 004 Sistrum Platforms including three direct coupled Audio Points
Equi=Tech 2Q Power Balancer
Soliloquy SM-2A3 Speakers and the Soliloquy speaker stands filled with Sistrum Micro-Bearing steel fill
Bybee Quantum speaker filters
Pure Note Epsilon Reference Speaker Cables
Pure Note Epsilon Reference Interconnects
Purist Proteus Digital Cable
Purist Proteus 20 Amp Power Cord
BMI Whale Elite MK I Power Cord
BMI Whale Elite MK II Power Cords
BMI Shark Power Cord
Shunyata, Black Mamba
Audio Points under all componenty
Salamander Archetype 5.0 with Mega-spikes
Dedicated 20 Amp circuits with FIM #880 outlets/ Wattgate 381/ Hubbell 8300 cryo

.
128x128Ag insider logo xs@2xlak
I'm glad to read your findings--I've been waiting for them. This confirms my conclusion of buying those PS Audio Power Ports @ $30 each and sending them for vapor cryo treatment. My power cords and interconnects are being sent to Jena Labs for deep immersion cryo treatment a few at a time...
After I posted this information it was suggested to me that I mention that the Hubbell cryogenically treated outlet (http://www.audioexcellenceaz.com/worldpower.htm) was used for five days by me before doing any critical listening. When I first received the Hubbell 8300 (for critical listening purposes) it was less dynamic and harsh; however, after the third day it began to sound very smooth and dynamic. Please note that all the outlets that Audio Excellence AZ/WorldPower ship have had 4 days of conditioning on the Cable Cooker. According to Alan Kafton, “without this conditioning (and the double- cryogenic treatment), it would take at least one month of continuous play for these outlets to sound decent.”
Lak: Thanks for posting your findings. As you know, i've been hunting around for some outlets. I'll probably pick up some Hubbell's and have them cryo'd locally. Sounds like the most bang for the buck. With as many outlets as i have to change, i really couldn't afford to go any other route. Sean
>