Rotel RCD-1070 replacement


I bought it new about 10 years ago, but haven't used it on a regular basis. On several occasions has had problems causing it to skip all over the place during play back (even on new discs). Maybe the problem is due to lack of use? Cost to diagnose will be $40-$150. So my questions...

1. Anyone familiar with it, or have tips on how to fix it?
2. Should I sell it and put the money toward another CDP?
3. Anyone know the value or want to buy it in this condition?
peterman1983
perterman, per my post above try changing the ribbon (approx 2 dollars). When I changed the Lazer on its own the CD player struggled to spin up and could not read the CD's, once I changed the ribbon (Lazer to system board ribbon) the unit worked fine. At this point you have nothing to loose. My unit was well out of warranty when I called Rotel for support and they sent me one for free.
Perterman, I forgot to mention that the lazer is delievered with a with a bit of solder applied,therefore, the lazer assembly is disabled by default. You will need a soldering gun to remove the tac thus re-enabling the lazer. If you not sure how to do this be read to instruction or google the process as there are several good instuction out there onthe net. Its a pain in the butt, and I think the reason for the solder is to prevent damage during transit.

Hmm, I think I'll try to contact Rotel for the ribbon cable, and do some research on the solder job. I've got plenty of experience with a soldering iron, so I think it's worth trying. At this point, I've picked up a budget replacement, which I'm actually quite happy with, for the money. So at least I can keep listening to my music, and take my time working on the Rotel :)

Thanks a ton for your input

Good news! I found the solder jumper and removed it this evening. Put things back together and I'm once again listening to music from my Rotel as we speak! I even picked one of my scratched up discs and it seems to be happy so far. It's too soon to call it a success, but things are looking good so far! I will probably still put the new ribbon cable in there when that comes too, since I've had the original one out a couple times.

Since I did pick up a budget replacement which will also so SACD and DVD-A, I'm interested in doing a more critical comparison between the two, now that this one is working again.

Thanks again for the tips, I would have probably given up on the broken Rotel without your suggestions.

I had a chance last night to compare the two players side by side. Althought I could hear very subtle differences between the two, none of them were enough to make me like either player more than the other. Maybe it's the type of music I listened to, or my hearing isn't what it needs to be in order to pick up on the differences. The Rotel is a great player, but based on my own personal experience and taste, I don't see any point in spending that much on a CD player again. Maybe that will change for me in the future. For now I think I'll see if I can get at least $150 or so for it, and look for a budget turntable to add to my setup.