How to connect Firewire Weiss 202 and Firewire HD


Hi,if I'm running out of a 2010 Mac Mini with a firewire port, how do I connect both my firewire hard drive and then the Weiss 202 DAC vis Firewire? Do I just run from the Mac firewire out to the Hard drive, then daisy chain via firewire over to the Weiss DAC? Or will it be better for me to use a USB hard drive connection and connect the Firewire out on the MAC directly to the Weiss 202? Thanks.
ldworet
Both will work. Here I had to connect the DAC to the HD because the HD was Firewire 800. Give it a go either way, I doubt you will discern a difference.
I've found that SOME firewire hard drives do not daisy-chain in an ideal manner. For example, if the device that is at the beginning of the chain (i.e., connected directly to the computer) is not powered up, the other device(s) in the chain may or may not be visible to the computer. Also, if the device that is at the beginning of the chain is not turned on before the device(s) that are connected later in the chain, those other devices in some cases may never be detected by the computer, until power is recycled in the opposite sequence (although that experience is with Windows machines; Mac's may be better in that respect).

In general, firewire hard drives that are described as using an Oxford chipset are to be preferred.

Regards,
-- Al
.

Some will argue that having the drive on a different bus than the DAC will sound better but you can daisy chain them if you wish. As is normally the case, there is no way to predict what will be "better" in your system. Try it various ways and decide for yourself.

,