Linear tracking vs. Pivoted tracking tone arms.


After searching all 735 existing analog "threads" I only found one short discussion regarding Linear tracking arms vs. tangential tracking arms. I have been a vinyl collector for over 32 years, and beleive that pure analog is still the "gold standard". In 1984 I purchased a Sony PS-X555ES linear tracking, biotracer, turntable. It is a fully automatic table with direct drive. This table has served me well, with no mechanical or set up issues. It is still in my system today. There are no adjustments other than balancing the tonearm to a netural position, then dialing in your tracking force. Two years ago I installed a Denon DL 160 moving coil cartridge, and am very pleased with its quality. I am considering retirement for the Sony and replacement with a Michell Gyro SE with Rega pivoted arm. Linear tracking arms are not availiable. This is a belt drive, full manual table. I understand that the master LP lacquer is cut on a lathe with the linear method. Should vinyl be replayed in the same manner for optimal sound? I would really like to hear from some hard core audiophile vinyl types on this one. By the way, my system consists of the followinig: Conrad-Johnson PV10B all tube pre-amp with tube phono stage. This is split into a C-J Primer 11 tube amp and C-J MF2250 FET amp, bi-amped into a pair of KEF Reference series 3-2 speakers. The Premier 11 feeds the mids and highs and the MF2250 feeds the bass section. All cables and interconnects are Monster Cables finest. Thanks in advance for any advice.
lbo
There are many linear tracking arms, here are the ones I know of that are currently being produced:

Rockport. (USA)
Walker (USA)
Eminent Technology (USA)
Clear Audio (Germany)
Air Tangent ( Sweden)

I am not certain if all of these may be purchased separately, or even if you would be willing to pay the price (some of these are VERY expensive).

The second part of your question is YES, linear tracking provides better performance than pivotal arms.

The best pivotal arms such as Graham, SME, VPI and others track the LP inaccurately for most of the side. A properly set up linear arm is correct for most of the LP.

I have owned many turntables, and on these at least six linear tracking and more than 15 pivotal arms. The best turntables I owned, were the VPI with Eminent Technology (with upgrade pump), Versa Dynamics (linear tracking) Basis Mk 5, with Airtangent Arm (linear tracking), Walker with Walker arm (linear tracking).

These setups cover a period of more than fifteen years, so consider the era when comparing these setups.
Lbo, I believe that theories of tonearm design are less important than their execution. I was a long-time owner of a linear tracking ET2 tonearm, with its unique air bearing mechanism, but now I am the happy owner of a VPI 10.5.
I think the Michell/Rega combination will likely yield better sound than your Sony, given its belt drive system and the strenth and rigidity of the Rega arm. Those features are just as important as linear vs. tangential. Of course, you want to assure proper overhang and anti-skating, but those should not be a problem.
While i can't hold a candle to Albert's knowledge or experience with vinyl, i do agree with his comments. I currently have three different linear trackers and one pivoted arm TT.

As someone else mentioned in another recent TT / vinyl thread, it is not necessarily the gear that you are using, it is how well it is set up that matters. While this was primarily talking about VTA, it could apply to anything. As such, work with what you have to obtain the best possible performance until you find something that you are sure will suit your needs. There are a LOT of things to consider when looking at TT / Arm / Cartridge combo's. Believe me ( and i'm sure that you already know this ), you can spend a LOT of money moving sideways or spinning your wheels in this hobby. Sean
>
I know I am going to be attacked big time for this, and I am not even going to defend myself, I am going to hit and run, let the insults fly as they will. I cannot begin to understand how Rega has gotten away with selling an arm with no VTA adjustment for all these years. I would by an AQ in a heart beat, even if I knew it had a few flaws, before I would buy what I can only consider a lo-fi arm like a Rega, since it has not real VTA adjustment. I have had my say, blast away!