Why Linear Tracking never took off?


Popular in the mid-80s...Linear tracking tables have vanished from the scene...what was the rational behind their creation?...Are there any good used tables to consider...or is this design long gone?....thanks...the simplicity of operation intrigues me...
128x128phasecorrect
Jody, no I don't know what a table like that would bring these days. I suspect not alot.
Just in case anyone is interested, there's an auction currently on Ebay for an Infinity turntable from 1973 which has an air-bearing arm. Looks like this prototype never got off the ground but it looks interesting (in a retro kind of way). My other 2 cents... the ET2 arm was quite wonderful but the armtube had to be meticulously cleaned and setup for the arm looked daunting.
I own both a restored Yamaha PX-2 and a Sony PSX-800 Linear biotracer. They outperm anything else I've ever heard.

John Kercheval
I also have the Sony PSX-800 with linear tracking biotracer arm, and find that it performs flawlessly. For example, it will play records so badly warped that an ordinary arm gets tossed completely out of the groove.

The reason that I bought it was because I attended a seminar at a High End audio shop on the subject of how to set up a conventional pivoting arm. I never realized how many angles and tracking forces were involved, and how many of these errors can only be approximately corrected because things change as the arm tracks the record from outside towards the spindle.

I think that most linear tracking arms failed because they relied on virtually frictionless bearings so that the arm would move with a very tiny sideways force from the stylus.
The Sony Biotracer arm uses servo motors to move the arm (side to side and up and down) so as to keep all those troublesome angles down to about 1/10 degree. Stylus downforce is also applied electronically, a nice feature which lets you adjust the force while a record is playing so that the sonic effect can be heard.
Hello Eldartford,

I own a PSX800 too. I bought it some weeks ago. It's like new but since today pushinging the starting button the arm doesn't move to the outer groove and won't lower the arm on the vinyl. If I give the arm a little help by pushing it, there's no problem. Every works fine then. I wonder if lubricating the rod will help. Do you have any experience with that?