Fixing Up Old Thorens


I have my dad's old Thorens TD 150 MKII with the original tonearm. I think the cartridge was replaced in the late 80s. It has been in storage for the past 10 years or so but I occasionally pull it out thinking that I might get into it. So my question is, how much money would I have to shell out to get this thing up to speed? I am guessing the table needs a good once over by a tech and I am sure that there are new tonearms, etc that are much better than what is on there. What would getting this in shape cost and can anyone recommend a good shop to take it to? I am near Tampa FL. Thanks
kemp
Kemp, I suggest you spend some time on http://www.theanalogdept.com/ website. It will give you detailed info on your 150. Best belts to use and where to purchase, how to oil the bearing and what oil to use, dialing in the suspension, tweaks, making an armboard, the best DIY mats, etc. SME 3009 arms seem to be the most popular arms on these tables.

If you take off the bottom cover and take a look, you will be amazed at Thorens simplicity. One of it's strong points, very simple to work on and everything you need to know is discussed in detail on the site provided above.

I highly recommend you do this maintenance yourself, it is very simple and easy and you will learn alot in the process.

The only real expense will come if you change arms. Everything else is peanuts.

Go for it!
You may get this up and running for almost no money. No doubt a new belt is needed. Get one intended for Thorens turntables, as they are slightly narrower than most generic replacement belts. If you are up to it, clean and lube the spindle bearing otherwise just add a drop or two of oil to the bearing well. See the analog dept website for more help. The TD 150 Mk II was (and still is) an excellent turntable, including the tonearm. If you are not sure how many hours are in the stylus, get a new one or replace the cartridge.
Have to agree with Goofytwoshoes. I recently bought a nice old TD160 and other than cleaning and adding a touch of Synthetic oil to the bearing..Still have the original belt.. No extra cost except for clening materials and 1 can of Synthetic oil.. Looks and works great...Pick up a cheap cartridge ( before you heavily in invest ) to see what type of cartridge you want to spend real money on..Give it a litle time and use what you have on hand first......
Hi guys I recently purchased a Thorens TD 150 (MK 1 I think). I added a RB300 tonearm with Ortofon red.The initial test was very disapointing, with vertually no bass. Any ideas as to why this is happening? I have a decent amp and speakers. I am a joiner and am really looking forward to building a new plinth from maple and a lovely piece of ebony for the arm board, but my enthusiasim has waned with the poor bass level.