2. analog
  3. 1204087493

Technics SL1200MK2 Cartridge Discussion

Hi,

I'd like to have a thread on cartridges that work with the Technics SL1200MK series tables.

I want to buy a Technics SL1210MK2 (the new black version from Musicians Friend) and need a cartridge recommendation. I am using a Musical Fidelity A308CR preamp that has MM/MC capability. My amps are Bryston 7B ST's and I have a pair of B&W Signature 800's on the way to replace my N801's. The MF Preamp is rolled off on top and the system is very listenable for long lengths of time. I'd describe it as detailed, but not too bright.

I really want to try the Technics table as it is relaible and inexpensive ($400 shipped or less for a used table if I go the ebay route). Please do not try to talk me into a different table. I had a VPI Scout and Dynavector 20x (High output) that I sold because I just wasn't using it. I'd like to keep this cheap so that I have decent TT available when and if I want to use it.

What can you recommed for a cart? I'd like to keep $160 to $200 as a max and stay lower if possible. Here is what I am considering:

Denon 103 (not the R)
Denon 110
Denon 160

Audio Technica 440 MLa

Shure M97xe

I do not know what carts work well with the Technics tonearm. I know that it is light and some threads recommend a Sumiko headshell for the Denons. What do I need to know here before buying a table and cart.

Thanks.
tigerwoodkhorns
cytocycle
1,034 posts
 
Tigerwoodkhorns: I think people recommend the rewire if you don't have the M5G version which has the better cabling (which is what I had). I can't speak for how it sounds with the stock wiring for the other versions.

I think the fluid damper should be an upgrade every SL1200 should have with ANY cart. My buddy is using it with a $90 cart and it made a big difference..

The Shelter 501 mk2 tracked fine and sounded great on my SL1210 M5G without the fluid damper so it's not required. So if you had to do it in stages get the arm re-wired first, buy yourself a cart and enjoy, and when funds happen get the fluid damper and re-discover your whole vinyl collection with each upgrade.
tigerwoodkhorns OP
130 posts
 
I'm down to the Shelter 501, the Audio Technica OC9 and the Denon 160. Big price difference between the three.

I am using a borrowed Benz LC80 and want to at lease equal its performance. It has a low output (0.09 mv) and I have to really turn up the volume.

I decided to skip the Denon 103 because I don't want to have problems with impedence matching, step ups, etc.

My preamp is a Musical Fidelity A308CR with 47K Ohm input and it has MC capability.

Anything that I need to know here?
johnnyb53
3,490 posts
 
For a higher performance high output MC, how about a Sumiko Blackbird or at least a BPS EVO III? The Blackbird is a S'phile Class B recommended component.

As for the Denon 103, you could get a Zu103 and matched K&K step-up transformer for less than the Shelter 501 (about $775 total).
piedpiper
753 posts
 
If you are willing to go as high as the Shelter 501 there are certainly other options to consider such as the Clearaudio Virtuoso Wood and Aurum Beta S as well as the Benz Ace and Glider, all of which can have high output if desired. The Dynavector Karat is a reasonably compliant medium high output MC. The Lyra Dorian is less compliant and, as such, not quite as good a match, with a little less output, but still healthy. The Sumiko Blue Point Special EVO III and Blackbird are high output MCs although less compliant like the Lyra. It will be good to know what loading options the MC stage has in your Musical Fidelity preamp.
tigerwoodkhorns OP
130 posts
 
The Musical Fidelity A308 Preamp lists the following for the phono section:

Input for 1v RMS output:

2.5 mV MM
350 uV MC

Input impedence 47K Ohm

Overload margin 31 db
More to discover